>

MOT History from tests of petrol APRILIA SXs year 2012

Review the list of common APRILIA SX failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history
Pass percent:65.91%
(The average a petrol APRILIA SX year 2012 passes without issue)
Based on:132 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment10
Registration plate issues7
Rear reflector on motorcycle missing |1.4.1|7
Front Stop lamp not working (4.3.1 (a) (ii))5
Front Wheel bearing rough when rotated (5.1.3 (b) (i))3
Registration plate lamp issues3
Headlamp insecure |1.2.3b|3
Rear reflector missing (4.8.2 (a) (ii))3
Drive chain excessively loose (6.1.7 (c) (i))3
Horn not working (7.7 (a))2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Front wheel bearings are excessively rough |2.3.5b|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Rear reflector missing |4.8.2 |a| |ii||2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Headlamp aim not tested |4.1.2 |b||1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Stop lamp not working front stop switch not working (4.3.1 (a) (ii))1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Drive chain excessively tight links tights,lack of lubrication |6.2.1d|1
Brake fluid significantly below minimum mark |1.1.10 |d| |ii||1
Nearside Motorcycle structure is deformed and structural rigidity is significantly reduced Footpeg area (6.1.1 (a) (i))1
Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Offside All direction indicators not working (4.4.1 (a) (ii))1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))1
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Handlebar excessively deformed |2.2.1 |c| |i||1
Throttle operating incorrectly (6.2.7 (a) (i))1
Drive chain excessively loose |6.2.1d|1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Horn not working |1.7.3a|1
Nearside Rear Direction indicator not working |1.5.1c|1
Offside Front Brake lever cracked |3.1.2c|1
Horn missing |1.7.1|1
Rear Position lamp not working (4.2.1 (a))1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Front wheel bearings have excessive free play |2.3.5b|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Headlamp insecure (4.1.1 (c))1
Offside Footrest insecure |6.2.1a|1
Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride wheel alignment adjuster components missing |6.2.1h|1
Nearside Rear Direction indicators not working |1.5.1c|1
Drive chain excessively tight |6.2.1d|1
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||1
Rear Wheel bearing has excessive play |5.1.3 |a| |i||1
Drive chain excessively loose |6.1.7 |c| |i||1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Offside Front Direction indicators not working |1.5.1c|1
Offside Rear Direction indicators not working |1.5.1c|1
Horn not loud enough to be heard by another road user |1.7.3a|1
All direction indicators not working (4.4.1 (a) (ii))1
Front Stop lamp not working Bake light not illuminating on use of front brake (4.3.1 (a) (ii))1
Fuel cap ineffective Ineffective due to missing seal (6.1.3 (b) (i))1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy