| Most common failures | No# failures |
|---|
| Rear reflector missing (4.8.2 (a) (ii)) | 20 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 14 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 11 |
| Rear Position lamp not working (4.2.1 (a)) | 11 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 8 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 7 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 7 |
| Riders seat insecure (6.2.5 (a) (ii)) | 5 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Registration plate issues | 5 |
| Front Brake disc contaminated (1.1.14 (b)) | 4 |
| Registration plate lamp issues | 4 |
| Headlamp aim out of alignment | 4 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Exhaust system insecure (6.1.2 (a)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Brake disc contaminated |1.1.14 |b|| | 2 |
| Headlamp insecure (4.1.1 (c)) | 2 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Stop lamp not working Not working from front lever (4.3.1 (a) (ii)) | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Brake performance unable to be tested see other rfrs (1.2.1 (g)) | 1 |
| Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
| Front Brake caliper inadequately mounted fouling brake disc due to wheel position (1.1.16 (c) (i)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Brake component insecure (1.1.21 (c)) | 1 |
| Wheel alignment incorrect which adversely affects the steering approx 4cm out of line, most likely due to a bent frame (2.4 (a)) | 1 |
| Motorcycle structure is so deformed it is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
| Stop lamp not working rear (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Central Front Steering linkage ball joint has excessive play Head stock bearing excessive play |2.1.3 |b| |i|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Lower Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases hole in downpipe (6.1.2 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition excessive niose (8.1.1 (a)) | 1 |
| Rear Position lamp likely to become detached |4.2.1 |c| |ii|| | 1 |
| Nearside Front Stop lamp not working REAR BRAKE STOPLAMP NOT WORKING (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
| Stop lamp not working from front control (4.3.1 (a) (ii)) | 1 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Stop lamp showing white light to the rear (4.3.3 (a) (ii)) | 1 |
| Rear Brake lever is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear Stop lamp likely to become detached (4.3.1 (c) (ii)) | 1 |
| Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Nearside Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Fuel cap missing seal missing |6.1.3 |b| |i|| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Upper Exhaust mounting missing |7.1.1c| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Horn not working push button missing n,s (7.7 (a)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play excessive play (2.2.2 (f) (i)) | 1 |
| Stop lamp not working Front brake lever brake light (4.3.1 (a) (ii)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Nearside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working on both levers (4.3.1 (a) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Front Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
| Rear Direction indicator not working righthand (4.4.1 (a) (ii)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Suspension component attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 1 |
| Rear Stop lamp not working switch (4.3.1 (a) (ii)) | 1 |
| Front Brake disc contaminated Fork oil (1.1.14 (b)) | 1 |
| Brake disc contaminated Oil from leaking fork seal. (1.1.14 (b)) | 1 |
| Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
| Central Front Shock absorber has a serious fluid leak both forks leaking (5.3.2 (b)) | 1 |
| Central Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls front brake control (4.3.2 (a) (iii)) | 1 |
| Nearside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |