| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 25 |
| Registration plate issues | 10 |
| Rear reflector on motorcycle missing |1.4.1| | 9 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Indicator tell tale not functioning |1.5.2| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Headlamp insecure |1.2.3b| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Brake lever insecure |3.1.2a| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Brake locking device insecure splined fitment bolt missing |3.2.A1e| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Fuel cap sealing washer missing |7.2.2c| | 1 |
| Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Nearside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Rear Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Centre Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake reaction bracket insecure |3.2.A1j| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |