Most common failures | No# failures |
---|
Registration plate issues | 23 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 19 |
Steering headbearing has excessive free play |2.2.2| | 19 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Riders seat insecure |6.2.1a| | 14 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Headlamp aim out of alignment | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 7 |
Horn not working |1.7.3a| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Fuel cap sealing washer missing |7.2.2c| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Horn is not continous or uniform |1.7.3c| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear Brake pipe inadequately supported |3.2.B2b| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Exhaust has part of the system missing |7.1.1a| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Fuel system component leaking Carb area |7.2.1a| | 1 |
Rear All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Seat insecure |6.2.1a| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Rear Footrest insecure |6.2.12 |a|| | 1 |
Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Riders seat with a defective supporting structure not locking down (6.2.5 (a) (i)) | 1 |
Fuel cap ineffective no seal (6.1.3 (b) (i)) | 1 |
Front Handlebar handgrip missing |2.1.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Central Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Central Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel rotation likely to be impeded rear fender insecure |6.2.1b| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Headlamp light intensity severely reduced dipped beam and full beam |4.1.4 |a|| | 1 |
Headlamp aim not tested not bright enough to test |4.1.2 |b|| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Fuel cap leaking (6.1.3 (b) (i)) | 1 |
Front Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Rear Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Fuel cap leaking seal missing |6.1.3 |b| |i|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Nearside Front Brake lever insecure |3.1.2a| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Upper Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Registration plate lamp issues | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp deteriorated and function impaired main beam |1.2.3a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Exhaust system insecure exhaust detatched at engine mount |6.1.2 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Brake disc significantly and obviously worn worn due to no pad material |1.1.14 |a| |i|| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |