Most common failures | No# failures |
---|
Headlamp aim out of alignment | 52 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 19 |
Drive chain excessively loose |6.2.1d| | 18 |
Front wheel bearings have excessive free play |2.3.5b| | 17 |
Front wheel bearings are excessively rough |2.3.5b| | 16 |
Headlamp aim beam image kick up to the offside |1.6| | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Rear reflector on motorcycle missing |1.4.1| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Front wheel bearings are excessively rough |2.3.5b| | 9 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 9 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Registration plate issues | 8 |
Drive chain worn to excess |6.2.1e| | 8 |
Offside Rear Footrest missing |6.2.1a| | 8 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
Rear Footrest missing |6.2.1a| | 7 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Horn not working |1.7.3a| | 6 |
Riders seat insecure |6.2.1a| | 6 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 6 |
Fuel system component insecure |7.2.1b| | 6 |
Front Front wheel bearings have excessive free play |2.3.5b| | 5 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 5 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 4 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 4 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Nearside Front Direction indicator insecure |1.5.3b| | 4 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Front Headlamp aim beam image kick up to the offside |1.6| | 4 |
Headlamp aim not tested |1.6| | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Rear Drive chain worn to excess |6.2.1e| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 3 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Brake hose damaged | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Indicator switch insecure |1.5.4| | 3 |
Fuel pipe leaking |7.2.1a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Offside Handlebar mounting clamp loose |2.1.1a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Footrest missing |6.2.1a| | 2 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Indicator switch insecure |1.5.4| | 2 |
Offside Footrest missing |6.2.1a| | 2 |
Rear suspension component loose |2.4.A.1a| | 2 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Offside Direction indicators not working |1.5.1c| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Drive chain excessively loose |6.2.1d| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 2 |
Seat insecure |6.2.1a| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Offside Rear Drive chain excessively loose |6.2.1d| | 2 |
Front suspension assembly component missing |2.3.1| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Centre Exhaust mounting missing |7.1.1c| | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Rear Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Centre Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Motorcycle structure cracked |6.1.1a| | 1 |
Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Offside Front Indicator switch insecure |1.5.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Offside Rear Drive chain excessively tight |6.2.1d| | 1 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Centre Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Nearside Drive chain fouling another component |6.2.1d| | 1 |
Offside Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Headlamp aim beam image kick up to the offside restricted beam with tape |1.6| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Registration plate lamp issues | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen right handed kick up and not to the left |4.1.2 |a|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Brake lever cannot be released smoothly fouling throttle cable
|3.1.3d| | 1 |
Rear mono-shock pivot excessively worn lower pivot |2.4.B.4| | 1 |
Offside Steering lock stop loose switch gear
|2.1.3| | 1 |
Direction indicator flashing more than 120 times per minute all |1.5.1c| | 1 |
Indicator switch defective |1.5.4| | 1 |
Nearside Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Offside Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Brake performance not tested |3.3| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
An item not tested |Manual| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Offside Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Horn is not continous or uniform |1.7.3c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Upper Fuel system component insecure |7.2.1b| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Upper Direction indicators not working |1.5.1c| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Upper Footrest missing |6.2.1a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Front Lower Valve stem seriously damaged (5.2.3 (j)) | 1 |
Central Front Upper Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
Nearside Front Upper Engine mounting/bracket bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Central Front Lower Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |