Most common failures | No# failures |
---|
Drive chain excessively loose |6.2.1d| | 18 |
Headlamp aim out of alignment | 15 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Horn not working |1.7.3a| | 11 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
Registration plate issues | 10 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Registration plate lamp issues | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Footrest missing |6.2.1a| | 4 |
Offside Rear Footrest missing |6.2.1a| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Offside Front Direction indicators not working |1.5.1c| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Drive chain worn to excess (6.1.7 (c) (i)) | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Rear position lamp obscured more than 50% |1.1.1d| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Footrest missing (6.2.12 (a)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Brake disc contaminated (1.1.14 (b)) | 2 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Split link lock tab missing |6.2.1h| | 1 |
Centre Rear Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Upper Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Stop lamp obscured |1.3.1c| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket nut missing |6.2.1h| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling rear wheel out of alignment causing sprocket nuts to foul on the swing arm |2.5.1| | 1 |
Offside Front Brake hose fouling brake hose fouling on bodywork,needs re routed |3.2.B3b| | 1 |
Footrest insecure |6.2.1a| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Nearside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Nearside Front Lower Brake disc contaminated |1.1.14 |b|| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Centre Rear Rear position lamp missing reg plate light missing |1.1.1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies off the brake pedal |1.3.1a| | 1 |
Offside Rear Hydraulic brake control feels spongy no rear brake off the pedal |3.1.4a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear All position lamps not working |4.2.1 |a|| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies rear brake control |1.3.1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Direction indicator flashing more than 120 times per minute ALL |1.5.1c| | 1 |
Brake component is severely distorted control 2 |3.1.5| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Foot rest clip missing. |6.2.1h| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Gear change pedal bolts loose/worn. |6.2.1h| | 1 |
Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Rear Rear position lamp missing |1.1.1a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Rear wheel spindle loose Sprocket fouling on swing arm possible spacer missing!!! |2.4.A.2b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Central Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking horn hanging |6.1.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front shock absorber seal failed and leaking oil both front |2.3.3| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Rear Lower Brake pedal attachment screws loose |3.1.2b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock Front brake lever touching clocks on left lock (2.1.4 (b)) | 1 |
Stop lamp not working front & rear levers (4.3.1 (a) (ii)) | 1 |
Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
Offside Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Rear Footrest missing both (6.2.12 (a)) | 1 |
Rear Brake excessively binding corroded pistons (1.2.1 (f)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Stop lamp not working Brake switch wires detached (4.3.1 (a) (ii)) | 1 |
Shock absorber insecurely attached at top at o/s (5.3.2 (a) (i)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Exhaust system insecure rear section insecure & clamp missing (6.1.2 (a)) | 1 |
Front Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Drive chain sprocket worn to excess Rear wheel (6.1.7 (c) (i)) | 1 |
Offside Footrest insecure Foot pedal fouled swinging arm (6.2.12 (a)) | 1 |
Front Headlamp insecure All fairing loose (4.1.1 (c)) | 1 |
Offside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Position lamp switch insecure (4.2.2 (b)) | 1 |
Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Rear Brake pedal pivot excessively worn (1.1.1 (b)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Rear Direction indicator likely to become detached Mount broken. (4.4.1 (c) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak Fork leg leaking fluid. (5.3.2 (b)) | 1 |