MOT History from tests of petrol APRILIA RSs year 2003

Review the list of common APRILIA RS failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history

Pass percent:56.47%

(The average a petrol APRILIA RS year 2003 passes without issue)

Based on:1,946 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	149
Rear wheel bearings have excessive free play \|2.4.A.2c\|	89
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	86
Drive chain excessively loose \|6.2.1d\|	81
Steering headbearing has excessive free play \|2.2.2\|	76
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	64
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	52
Registration plate issues	49
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	46
Drive chain worn to excess \|6.2.1e\|	37
Rear Drive chain sprocket worn to excess \|6.2.1e\|	36
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	32
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	31
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	31
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	31
Front wheel bearings are excessively rough \|2.3.5b\|	27
Rear Footrest missing \|6.2.1a\|	26
Riders seat insecure \|6.2.1a\|	26
Front wheel bearings have excessive free play \|2.3.5b\|	25
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	23
Nearside Rear Footrest missing \|6.2.1a\|	23
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	23
Offside Rear Footrest missing \|6.2.1a\|	23
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	20
Nearside Handlebar mounting clamp bolt loose \|2.1.1a\|	20
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	20
Horn not working \|1.7.3a\|	19
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	19
Front Front wheel bearings have excessive free play \|2.3.5b\|	19
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	19
Rear reflector on motorcycle missing \|1.4.1\|	19
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	19
Offside Front Direction indicator not working \|1.5.1c\|	19
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	18
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	17
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	16
Drive chain excessively tight \|6.2.1d\|	16
Nearside Handlebar mounting clamp loose \|2.1.1a\|	15
Nearside Front Direction indicators not working \|1.5.1c\|	15
Front Steering headbearing has excessive free play \|2.2.2\|	14
Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Indicator switch insecure \|1.5.4\|	14
Handlebar mounting clamp bolt loose \|2.1.1a\|	13
Direction indicators not working \|1.5.1c\|	13
Nearside Front Direction indicator not working \|1.5.1c\|	12
Exhaust is leaking and excessively noisey \|7.1.1b\|	12
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	12
Front Roller brake test indicates a binding brake \|3.3.A1a\|	12
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	11
Offside Handlebar mounting clamp loose \|2.1.1a\|	11
Offside Front Handlebar mounting clamp bolt loose \|2.1.1a\|	11
Throttle operating incorrectly \|6.2.1f\|	11
Brake hose damaged	11
Headlamp aim beam image kick up to the offside \|1.6\|	11
Rear Drive chain excessively loose \|6.2.1d\|	11
Horn not loud enough to be heard by another road user \|1.7.3a\|	10
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	10
Offside Front Direction indicators not working \|1.5.1c\|	10
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	10
Rear wheel bearings are excessively rough \|2.4.A.2c\|	10
Headlamp insecure \|1.2.3b\|	10
Offside Handlebar mounting clamp bolt loose \|2.1.1a\|	9
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	9
Rear Drive chain worn to excess \|6.2.1e\|	9
Offside Handlebar deformed \|2.1.1b\|	9
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	9
Clutch lever shortened so it cannot be readily operated. \|6.2.1g\|	8
Fuel system component leaking \|7.2.1a\|	8
Rear Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	8
Headlamp aim not tested \|1.6\|	8
Stop lamp affected by the operation of another lamp \|1.3.2\|	8
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	8
An item not tested \|Manual\|	8
Nearside Rear Direction indicators not working \|1.5.1c\|	7
Front Front wheel bearings are excessively rough \|2.3.5b\|	7
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	7
Brake pedal pivots excessively worn \|3.1.3a\|	7
Fuel system component insecure \|7.2.1b\|	7
Steering control handlebar movement restricted by taut cables \|2.1.2c\|	7
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	7
Fairings insecure and likely to impede the steering \|2.1.2e\|	7
Stop lamp remains on when the brake is released \|1.3.1e\|	7
Nearside Front Direction indicator insecure \|1.5.3b\|	7
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Offside Rear Direction indicator not working \|1.5.1c\|	6
Front Brake lever has inadequate reserve travel \|3.1.3b\|	6
Nearside Front Footrest insecure \|6.2.1a\|	6
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	6
Front Drive chain sprocket worn to excess \|6.2.1e\|	6
Nearside Front Handlebar mounting clamp bolt loose \|2.1.1a\|	6
Nearside Rear Direction indicator not working \|1.5.1c\|	6
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	6
Drive chain fouling another component \|6.2.1d\|	6
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	6
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	6
Nearside Front Handlebar mounting clamp loose \|2.1.1a\|	6
Rear Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	5
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	5
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	5
Headlamp switch insecure \|1.2.4\|	5
Rear position lamp insecure \|1.1.1c\|	5
Direction indicator not working \|1.5.1c\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Footrest missing \|6.2.1a\|	5
Clutch lever positioned so it cannot be readily operated. \|6.2.1g\|	5
Steering control handlebar movement restricted by cables caught on a projection \|2.1.2c\|	4
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	4
Rear Brake pedal is damaged and the brake cannot be readily applied \|3.1.3c\|	4
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	4
Front Direction indicator not working \|1.5.1c\|	4
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Exhaust mounting missing \|7.1.1c\|	4
Handlebar mounting clamp loose \|2.1.1a\|	4
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	4
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	4
Nearside Front Fairings insecure and likely to impede the steering \|2.1.2e\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Offside Front Direction indicator insecure \|1.5.3b\|	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
Headlamp switch faulty \|1.2.4\|	4
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	4
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	4
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Position lamp switch insecure \|1.1.4b\|	4
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	4
Lower Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	3
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	3
Brake pedal is damaged and the brake cannot be readily applied \|3.1.3c\|	3
Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	3
Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	3
Front suspension assembly component loose \|2.3.1\|	3
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	3
Nearside Handlebar deformed \|2.1.1b\|	3
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls \|2.1.2b\|	3
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	3
Offside Front Footrest insecure \|6.2.1a\|	3
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	3
Rear Brake reaction bracket insecure \|3.2.A1j\|	3
Front Brake performance not tested \|3.3\|	3
Front Direction indicator missing \|1.5.1a\|	3
Rear Direction indicator flashing less than 60 times a minute \|1.5.1c\|	3
Front position lamp incorrect colour \|1.1.2a\|	3
Nearside Headlamp switch insecure \|1.2.4\|	3
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Nearside Indicator switch insecure \|1.5.4\|	3
Rear Brake pedal is inoperative \|3.1.3c\|	3
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Horn is not a constant note \|1.7.3c\|	3
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Nearside Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	3
Rear Brake pedal pivots excessively worn \|3.1.3a\|	3
Upper Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Offside Front Handlebar deformed \|2.1.1b\|	3
Nearside Rear Drive chain excessively loose \|6.2.1d\|	3
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Rear Rear wheel bearings are excessively rough \|2.4.A.2c\|	3
Brake pedal cannot be applied smoothly \|3.1.3d\|	3
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Nearside Position lamp switch insecure \|1.1.4b\|	3
Front Floor brake test indicates a binding brake \|3.3.C2c\|	3
Brake lever insecure \|3.1.2a\|	3
Brake pedal is positioned so that the brake cannot be readily applied \|3.1.3c\|	3
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	3
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	3

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	149
Rear wheel bearings have excessive free play \|2.4.A.2c\|	89
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	86
Drive chain excessively loose \|6.2.1d\|	81
Steering headbearing has excessive free play \|2.2.2\|	76
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	64
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	52
Registration plate issues	49
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	46
Drive chain worn to excess \|6.2.1e\|	37
Rear Drive chain sprocket worn to excess \|6.2.1e\|	36
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	32
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	31
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	31
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	31
Front wheel bearings are excessively rough \|2.3.5b\|	27
Rear Footrest missing \|6.2.1a\|	26
Riders seat insecure \|6.2.1a\|	26
Front wheel bearings have excessive free play \|2.3.5b\|	25
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	23
Nearside Rear Footrest missing \|6.2.1a\|	23
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	23
Offside Rear Footrest missing \|6.2.1a\|	23
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	20
Nearside Handlebar mounting clamp bolt loose \|2.1.1a\|	20
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	20
Horn not working \|1.7.3a\|	19
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	19
Front Front wheel bearings have excessive free play \|2.3.5b\|	19
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	19
Rear reflector on motorcycle missing \|1.4.1\|	19
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	19
Offside Front Direction indicator not working \|1.5.1c\|	19
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	18
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	17
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	16
Drive chain excessively tight \|6.2.1d\|	16
Nearside Handlebar mounting clamp loose \|2.1.1a\|	15
Nearside Front Direction indicators not working \|1.5.1c\|	15
Front Steering headbearing has excessive free play \|2.2.2\|	14
Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Indicator switch insecure \|1.5.4\|	14
Handlebar mounting clamp bolt loose \|2.1.1a\|	13
Direction indicators not working \|1.5.1c\|	13
Nearside Front Direction indicator not working \|1.5.1c\|	12
Exhaust is leaking and excessively noisey \|7.1.1b\|	12
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	12
Front Roller brake test indicates a binding brake \|3.3.A1a\|	12
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	11
Offside Handlebar mounting clamp loose \|2.1.1a\|	11
Offside Front Handlebar mounting clamp bolt loose \|2.1.1a\|	11
Throttle operating incorrectly \|6.2.1f\|	11
Brake hose damaged	11
Headlamp aim beam image kick up to the offside \|1.6\|	11
Rear Drive chain excessively loose \|6.2.1d\|	11
Horn not loud enough to be heard by another road user \|1.7.3a\|	10
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	10
Offside Front Direction indicators not working \|1.5.1c\|	10
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	10
Rear wheel bearings are excessively rough \|2.4.A.2c\|	10
Headlamp insecure \|1.2.3b\|	10
Offside Handlebar mounting clamp bolt loose \|2.1.1a\|	9
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	9
Rear Drive chain worn to excess \|6.2.1e\|	9
Offside Handlebar deformed \|2.1.1b\|	9
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	9
Clutch lever shortened so it cannot be readily operated. \|6.2.1g\|	8
Fuel system component leaking \|7.2.1a\|	8
Rear Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	8
Headlamp aim not tested \|1.6\|	8
Stop lamp affected by the operation of another lamp \|1.3.2\|	8
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	8
An item not tested \|Manual\|	8
Nearside Rear Direction indicators not working \|1.5.1c\|	7
Front Front wheel bearings are excessively rough \|2.3.5b\|	7
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	7
Brake pedal pivots excessively worn \|3.1.3a\|	7
Fuel system component insecure \|7.2.1b\|	7
Steering control handlebar movement restricted by taut cables \|2.1.2c\|	7
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	7
Fairings insecure and likely to impede the steering \|2.1.2e\|	7
Stop lamp remains on when the brake is released \|1.3.1e\|	7
Nearside Front Direction indicator insecure \|1.5.3b\|	7
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Offside Rear Direction indicator not working \|1.5.1c\|	6
Front Brake lever has inadequate reserve travel \|3.1.3b\|	6
Nearside Front Footrest insecure \|6.2.1a\|	6
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	6
Front Drive chain sprocket worn to excess \|6.2.1e\|	6
Nearside Front Handlebar mounting clamp bolt loose \|2.1.1a\|	6
Nearside Rear Direction indicator not working \|1.5.1c\|	6
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	6
Drive chain fouling another component \|6.2.1d\|	6
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	6
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	6
Nearside Front Handlebar mounting clamp loose \|2.1.1a\|	6
Rear Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	5
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	5
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	5
Headlamp switch insecure \|1.2.4\|	5
Rear position lamp insecure \|1.1.1c\|	5
Direction indicator not working \|1.5.1c\|	5
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Footrest missing \|6.2.1a\|	5
Clutch lever positioned so it cannot be readily operated. \|6.2.1g\|	5
Steering control handlebar movement restricted by cables caught on a projection \|2.1.2c\|	4
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	4
Rear Brake pedal is damaged and the brake cannot be readily applied \|3.1.3c\|	4
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	4
Front Direction indicator not working \|1.5.1c\|	4
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Brake lever has inadequate reserve travel \|3.1.3b\|	4
Exhaust mounting missing \|7.1.1c\|	4
Handlebar mounting clamp loose \|2.1.1a\|	4
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	4
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	4
Nearside Front Fairings insecure and likely to impede the steering \|2.1.2e\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Offside Front Direction indicator insecure \|1.5.3b\|	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
Headlamp switch faulty \|1.2.4\|	4
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	4
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	4
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Position lamp switch insecure \|1.1.4b\|	4
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	4
Lower Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	3
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	3
Brake pedal is damaged and the brake cannot be readily applied \|3.1.3c\|	3
Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	3
Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	3
Front suspension assembly component loose \|2.3.1\|	3
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	3
Nearside Handlebar deformed \|2.1.1b\|	3
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls \|2.1.2b\|	3
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	3
Offside Front Footrest insecure \|6.2.1a\|	3
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	3
Rear Brake reaction bracket insecure \|3.2.A1j\|	3
Front Brake performance not tested \|3.3\|	3
Front Direction indicator missing \|1.5.1a\|	3
Rear Direction indicator flashing less than 60 times a minute \|1.5.1c\|	3
Front position lamp incorrect colour \|1.1.2a\|	3
Nearside Headlamp switch insecure \|1.2.4\|	3
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Nearside Indicator switch insecure \|1.5.4\|	3
Rear Brake pedal is inoperative \|3.1.3c\|	3
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Horn is not a constant note \|1.7.3c\|	3
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Nearside Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	3
Rear Brake pedal pivots excessively worn \|3.1.3a\|	3
Upper Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Offside Front Handlebar deformed \|2.1.1b\|	3
Nearside Rear Drive chain excessively loose \|6.2.1d\|	3
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Rear Rear wheel bearings are excessively rough \|2.4.A.2c\|	3
Brake pedal cannot be applied smoothly \|3.1.3d\|	3
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Nearside Position lamp switch insecure \|1.1.4b\|	3
Front Floor brake test indicates a binding brake \|3.3.C2c\|	3
Brake lever insecure \|3.1.2a\|	3
Brake pedal is positioned so that the brake cannot be readily applied \|3.1.3c\|	3
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	3
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	3

MOT History from tests of petrol APRILIA RSs year 2003

Find us on Facebook