Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Registration plate lamp issues | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Horn not working |1.7.3a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Central Front Horn not working |1.7.3a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| excessively worn excess free play in disc |3.2.A1l| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Seat insecure passenger grab rail |6.2.1a| | 1 |
Front Brake hose leaking (1.1.12 (c)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Stop lamp not working Front brake light switch (4.3.1 (a) (ii)) | 1 |
Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Indicator switch insecure |1.5.4| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Position lamp switch faulty |1.1.4a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Drive chain excessively loose (6.2.1d) | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i|| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Centre Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Headlamp aim headlamp deteriorated and function impaired No clear beam image. |1.2.3a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Subframe bolt missing. |6.1.1c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Inner Steering lock stop missing |2.1.3| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Central Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Brake disc significantly and obviously worn Warped (1.1.14 (a) (i)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Front wheel bearings have excessive free play this bike should not be used on the road |2.3.5b| | 1 |
Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Brake hose excessively deteriorated | 1 |
Rear Suspension component ball joint excessively worn linkage on swingarm (5.3.4 (a) (i)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Brake pipe leaking from reservoir to master cylinder |1.1.11 |b|| | 1 |