Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Headlamp aim beam image kick up to the offside |1.6| | 14 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Handlebar deformed |2.1.1b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Brake master cylinder insecure (1.1.10 (c)) | 1 |
Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
Nearside Rear Footrest insecure broken (6.2.12 (a)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working on front brake (4.3.1 (a) (ii)) | 1 |
Stop lamp not working on rear brake (4.3.1 (a) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases Corroded & broken at joint (6.1.2 (a)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Stop lamp missing not working |1.3.3a| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Registration plate issues | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake lever pivot excessively tight |1.1.1 |a|| | 1 |
Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Upper Fork yoke deformed |2.1.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Steering movement excessively notchy with the wheel raised (2.2.1b) | 1 |
Front Horn not working (7.7 (a)) | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Steering control handlebar movement restricted by trapped cables cables fouling fuel tank stopping the steering reaching the lock stops on both sides |2.1.2c| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake performance not tested |3.3| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |