Most common failures | No# failures |
---|
Headlamp aim out of alignment | 89 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 33 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 18 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
Registration plate issues | 12 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Registration plate lamp issues | 7 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 7 |
Riders seat insecure |6.2.1a| | 7 |
Horn not working |1.7.3a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 5 |
Handlebar mounting clamp loose |2.1.1a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Offside Steering lock stop ineffective |2.1.3| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Fuel cap sealing washer missing |7.2.2c| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Headlamp aim not tested |1.6| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 2 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Brake cylinder leaking hydraulic fluid Front |3.2.B1e| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working Front brake |4.3.1 |a| |ii|| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake lagging in operation not releasing straight away. (1.2.1 (d)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Motorcycle structure excessively damaged handlebar lower cover |6.1.1a| | 1 |
Motorcycle structure excessively damaged front forks chrome covers |both sides| |6.1.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Rear wheel rotation likely to be impeded Mud guard contacting rear wheel |6.2.1b| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Nearside Lower Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Brake fluid contaminated |1.8 |a|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Direction indicators affected by the operation of another lamp all |1.5.1c| | 1 |
Centre Rear Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Nearside Rear Lower Brake component has restricted free movement and operation is likely to be impeded Cable touching wheel |3.2.A1h| | 1 |
Stop lamp does not illuminate immediately a brake applies Front Brake Lever |1.3.1a| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Handlebar so insecure it is likely to become detached Mounting bolts loose (2.2.1 (b) (ii)) | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Exhaust has a major leak of exhaust gases rotting through (6.1.2 (a)) | 1 |
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Footrest insecure |6.2.1a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Nearside Rear Stop lamp missing |1.3.3a| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Fuel cap ineffective fuel cap seal missing (6.1.3 (b) (i)) | 1 |
Suspension component pin or bush excessively worn rear suspension bearings (5.3.4 (a) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen incorrect pattern (4.1.2 (a)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp does not illuminate immediately a brake applies from rear control |1.3.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Exhaust system insecure BOLTS MISSING |6.1.2 |a|| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Central Rear Position lamp light intensity significantly reduced Replaced 24v bulb with correct bulb (4.2.3 (a) (ii)) | 1 |
Central Rear Stop lamp light intensity significantly reduced Replaced 24v bulb with correct bulb (4.3.3 (a) (ii)) | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working when rear brake is applied (4.3.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Direction indicators not working all |1.5.1c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |