>

MOT History from tests of petrol APRILIA MOJITOs year 2002

Review the list of common APRILIA MOJITO failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history
Pass percent:74.03%
(The average a petrol APRILIA MOJITO year 2002 passes without issue)
Based on:593 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment34
Rear Brake lever has inadequate reserve travel |3.1.3b|20
Registration plate issues13
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||13
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|12
Exhaust is leaking and excessively noisey |7.1.1b|9
Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Steering headbearing has excessive free play |2.2.2|6
Rear reflector on motorcycle missing |1.4.1|5
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|5
Exhaust excessively deteriorated |7.1.1a|5
Front wheel bearings have excessive free play |2.3.5b|5
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Horn not working |1.7.3a|3
Horn not loud enough to be heard by another road user |1.7.3a|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Handlebar mounting clamp loose |2.1.1a|3
Headlamp aim beam image kick up to the offside |1.6|3
Fuel cap sealing washer missing |7.2.2c|3
Riders seat insecure |6.2.1a|3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|3
Rear wheel rotation likely to be impeded |6.2.1b|3
Front Floor brake test indicates a binding brake |3.3.C2c|2
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d|2
Throttle operating incorrectly |6.2.1f|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Rear Exhaust excessively deteriorated |7.1.1a|2
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))2
Stop lamp remains on when the brakes are released2
Front Front wheel bearings are excessively rough |2.3.5b|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Direction indicators flashing more than 120 times per minute |1.5.1c|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Direction indicators affected by the operation of another lamp |1.5.1c|2
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|2
Headlamp aim not tested |1.6|2
Front Front wheel bearings have excessive free play |2.3.5b|2
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||2
Indicator tell tale not operating correctly |1.5.2|2
Handlebar mounting clamp bolt loose |2.1.1a|2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Stop lamp affected by the operation of another lamp |1.3.2|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Centre Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Centre Rear reflector on motorcycle missing |1.4.1|1
Handlebar mounting insecure |2.2.1 |a| |i||1
Direction indicators not working |1.5.1c|1
Front wheel bearings are excessively rough |2.3.5b|1
Nearside Front Direction indicator not working |1.5.1c|1
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c|1
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Front Lower Shock absorber has an excessively worn bush both |5.3.2 |c||1
Nearside Front Brake lever has insufficient reserve travel |1.1.2 |a||1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Centre Rear Rear reflector on motorcycle missing |1.4.1|1
Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Front Brake lever is inoperative |3.1.3c|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Indicator tell tale not functioning |1.5.2|1
Front Brake caliper|s| insecure |3.2.A1j|1
Front Brake reaction bracket insecure |3.2.A1j|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Nearside Rear suspension bush excessively deteriorated engine pivot (2.4.A2a(i))1
Rear suspension has an inadequate repair of a load bearing member or its supporting structure. (2.4.A.2d)1
Offside Rear Direction indicators not working (1.5.1c)1
Rear Brake lever has inadequate reserve travel (3.1.3b)1
Handlebar mounting clamp loose (2.1.1a)1
Rear wheel rotation likely to be impeded rear hugger insecure (6.2.1b)1
Centre Riders seat insecure |6.2.1a|1
Headlamp insecure |1.2.3b|1
Fuel cap missing |7.2.2a|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Direction indicator affected by the operation of another lamp |1.5.1c|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Brake lever has inadequate reserve travel |3.1.3b|1
Brake lever cannot be released smoothly |3.1.3d|1
Roller brake test indicates a binding brake |3.3.A1a|1
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Suspension arm pin or bush excessively worn silent block (5.3.4 (a) (i))1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Stop lamp missing |1.3.3a|1
Rear position lamp missing |1.1.1a|1
Nearside Rear Direction indicator not working |1.5.1c|1
Exhaust mounting missing |7.1.1c|1
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))1
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Steering lock stop maladjusted |2.1.3|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Headlamp reflector seriously defective (4.1.1 (b) (ii))1
Stop lamp not working (4.3.1 (a) (ii))1
Offside Direction indicator not working (4.4.1 (a) (ii))1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Front Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Centre Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii||1
Front Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Rear Brake lever has insufficient reserve travel (1.1.2 (a))1
Handlebar handgrip not secure to handlebars. |2.1.1c|1
Offside Rear Footrest insecure |6.2.1a|1
Brake hose damaged1
Rear Brake excessively binding (1.2.1 (f))1
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Rear Footrest missing |6.2.1a|1
Front Brake component is excessively corroded |3.1.5|1
Rear Brake lever mounting insecure |3.1.2a|1
Front Lower Brake pipe union leaking fluid |3.2.B4|1
Offside Rear Lower Exhaust excessively deteriorated |7.1.1a|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Horn control defective |1.7.2a|1
Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Headlamp aim not tested |4.1.2 |b||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Nearside Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b|1
Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Rear Direction indicators not working |1.5.1c|1
Registration plate lamp issues1
Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Nearside Steering lock stop maladjusted |2.1.3|1
Front Roller brake test indicates a binding brake |3.3.A1a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy