>

MOT History from tests of petrol APRILIA AREAs year 2001

Review the list of common APRILIA AREA failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history
Pass percent:65.45%
(The average a petrol APRILIA AREA year 2001 passes without issue)
Based on:191 MOT Tests
Most common failuresNo# failures
Stop lamp does not illuminate immediately a brake applies |1.3.1a|10
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Exhaust is leaking and excessively noisey |7.1.1b|7
Headlamp aim out of alignment7
Registration plate issues6
Rear reflector on motorcycle missing |1.4.1|3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Fuel system component leaking |7.2.1a|2
Front Motorcycle structure excessively damaged |6.1.1a|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Steering movement excessively stiff with the wheel raised (2.2.1b)2
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|2
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Steering headbearing has excessive free play |2.2.2|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Wheel alignment incorrect which adversely affects the steering |2.5.1|2
Front position lamp insecure |1.1.1c|2
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|2
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|2
Front suspension has inadequate damping effect. |2.3.6c|1
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)1
Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)1
Steering movement excessively notchy with the weight on the lower bearing (2.2.1a)1
Steering movement excessively rough with the wheel raised (2.2.1b)1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)1
Nearside Front shock absorber seal failed and leaking oil (2.3.3)1
Lower Front suspension has severe distortion of a load bearing member or its supporting structure. (2.3.8)1
Centre Upper Rear suspension has severe distortion of a load bearing member or its supporting structure. (2.4.A.2d)1
Rear reflector on motorcycle missing (1.4.1)1
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Front Steering headbearing has excessive free play |2.2.2|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Motorcycle structure excessively distorted |6.1.1a|1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Rear reflector missing (4.8.2 (a) (ii))1
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Offside Front Fairings insecure and likely to impede the steering |2.1.2e|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear position lamp insecure |1.1.1c|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Rear wheel rotation likely to be impeded |6.2.1b|1
Rear Brake hose leaking fluid |3.2.B4|1
Offside Front Brake lever mounting insecure |3.1.2a|1
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii))1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear Riders seat insecure |6.2.1a|1
Position lamp switch faulty |1.1.4a|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Hydraulic brake control creeps under load. |3.1.4a|1
Centre Rear Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Fuel pipe leaking |7.2.1a|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Horn not working |1.7.3a|1
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c|1
Offside Direction indicators flashing less than 60 times a minute |1.5.1c|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Lower Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Rear Brake component worn and seriously reduced in strength |3.2.A1|1
Nearside Front Brake hose leaking fluid |3.2.B4|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Rear reflector on motorcycle obscured |1.4.1|1
Headlamp insecure |1.2.3b|1
Front Motorcycle structure adversely modified |6.1.1b|1
Front Headlamp insecure |1.2.3b|1
Front Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Headlamp aim headlamp damaged and function impaired |1.2.3a|1
Front Brake master cylinder insecurely mounted |3.2.B1a|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy