Most common failures | No# failures |
---|
Headlamp aim out of alignment | 73 |
Registration plate issues | 29 |
Rear reflector on motorcycle missing |1.4.1| | 26 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 24 |
Exhaust is leaking and excessively noisey |7.1.1b| | 22 |
Steering headbearing has excessive free play |2.2.2| | 21 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 19 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 18 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Drive chain excessively loose |6.2.1d| | 14 |
Front wheel bearings have excessive free play |2.3.5b| | 14 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 13 |
Headlamp aim beam image kick up to the offside |1.6| | 12 |
Horn not working |1.7.3a| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 9 |
Throttle operating incorrectly |6.2.1f| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Brake hose damaged | 7 |
Fuel cap sealing washer missing |7.2.2c| | 7 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Indicator tell tale not functioning |1.5.2| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Nearside Rear Footrest missing |6.2.1a| | 6 |
Drive chain excessively tight |6.2.1d| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Front Steering headbearing has excessive free play |2.2.2| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Direction indicators not working |1.5.1c| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front Direction indicators not working |1.5.1c| | 5 |
Rear reflector on motorcycle obscured |1.4.1| | 5 |
Offside Rear Footrest missing |6.2.1a| | 5 |
Fuel system component leaking |7.2.1a| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Rear wheel rotation likely to be impeded |6.2.1b| | 4 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 4 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Indicator switch insecure |1.5.4| | 4 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 4 |
Offside Steering lock stop ineffective |2.1.3| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Exhaust mounting missing |7.1.1c| | 3 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear position lamp insecure |1.1.1c| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Headlamp deteriorated and function impaired |1.2.3a| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Front Indicator switch insecure |1.5.4| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Stop lamp insecure |1.3.3b| | 2 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
Front Horn not working |1.7.3a| | 2 |
Rear wheel insecure |4.2.3b| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 2 |