| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 35 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
| Drive chain excessively loose |6.2.1d| | 19 |
| Registration plate issues | 17 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 12 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
| Drive chain worn to excess |6.2.1e| | 9 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
| Front wheel bearings are excessively rough |2.3.5b| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
| Rear reflector on motorcycle missing |1.4.1| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Horn not working |1.7.3a| | 7 |
| Offside Rear Footrest missing |6.2.1a| | 6 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
| Rear Footrest missing |6.2.1a| | 6 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Nearside Front Direction indicator not working |1.5.1c| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
| An item not tested |Manual| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Fuel system component insecure |7.2.1b| | 5 |
| Nearside Rear Direction indicator not working |1.5.1c| | 5 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
| Nearside Rear Footrest missing |6.2.1a| | 4 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Front suspension has inadequate damping effect. |2.3.6c| | 4 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Offside Handlebar deformed |2.1.1b| | 3 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Indicator switch insecure |1.5.4| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 3 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Brake hose damaged | 3 |
| Front Brake hose fouling |3.2.B3b| | 3 |
| Registration plate lamp issues | 3 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Rear Direction indicator not working |1.5.1c| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 3 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Headlamp insecure |1.2.3b| | 2 |
| Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Nearside Motorcycle structure cracked |6.1.1a| | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 2 |
| Nearside Front Direction indicator insecure |1.5.3b| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Front position lamp incorrect colour |1.1.2a| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Nearside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Brake lever insecure |3.1.2a| | 1 |
| Nearside Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Nearside Direction indicator missing |1.5.1a| | 1 |
| Offside Direction indicator missing |1.5.1a| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension Rear Shock Failure. |2.4.A.3a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Rear Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator obviously incorrectly positioned broken (4.4.3 (a)) | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Inner Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake excessively binding rear |1.2.1 |f|| | 1 |
| Stop lamp not working front switch |4.3.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Upper Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Headlamp switch insecure |1.2.4| | 1 |
| Front Headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Nearside Position lamp switch insecure |1.1.4b| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Centre Rear Stop lamp missing |1.3.3a| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Front Handlebar handgrip missing |2.1.1c| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Fairing so located that it is likely to impede the steering horn catching fairing on lock to lock |2.1.2e| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Nearside Front Upper An item not tested |Manual| | 1 |
| Centre Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp does not illuminate immediately a brake applies from front brake |1.3.1a| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Rear Brake performance not tested |3.3| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Brake performance not tested |3.3| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Chain guard fouling another component |6.2.1c| | 1 |
| Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Steering operation restricted in free movement from lock to lock clutch lever (2.1.4 (c)) | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Offside Handlebar retaining device loose |2.2.1 |b| |i|| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Handlebar fractured |2.1.1b| | 1 |
| Offside Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Lower Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Front Roller brake test indicates a severely grabbing brake freed off caliper. |3.3.A1b| | 1 |
| Rear Roller brake test indicates a severely grabbing brake freed off caliper. |3.3.A1b| | 1 |
| Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Rear Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Front wheel insecure |4.2.3b| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Centre Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Centre Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Brake pipe excessively chafed |3.2.B2a| | 1 |
| Front Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Brake hose fouling |3.2.B3b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Rear Wheel spoke excessively bent |4.2.1b| | 1 |
| Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
| Rear Wheel spoke cracked. |4.2.1b| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Offside Front Steering lock stop missing |2.1.3| | 1 |
| Offside Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Nearside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Centre Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Wheel more than one fixing missing front spindle pinch bolts snapped and not functioning (5.2.1 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Rear Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain fouling another component |6.2.1d| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |