Most common failures | No# failures |
---|
Headlamp aim out of alignment | 26 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Headlamp aim beam image kick up to the offside |1.6| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Registration plate issues | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Horn not working |1.7.3a| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Fairings insecure and likely to impede the steering |2.1.2e| | 4 |
Front Headlamp aim beam image kick up to the offside |1.6| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Registration plate lamp issues | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Seat insecure |6.2.1a| | 2 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear wheel spindle loose |2.4.A.2b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Nearside Steering lock stop ineffective yoke hits the tank on l/h lock |2.1.3| | 1 |
Handlebar deformed bent |2.1.1b| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Headlamp switch insecure moves with throttle |1.2.4| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Upper Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Centre Front Upper Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Centre Front Upper Indicator tell tale not functioning |1.5.2| | 1 |
Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Horn emits 2 or more alternating tones |1.7.3b| | 1 |
Rear Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Centre Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Upper Rear position lamp insecure |1.1.1c| | 1 |
Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Fuel tank insecure |6.1.3 |a| |i|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Brake lever has insufficient reserve travel touching throttle |1.1.2 |a|| | 1 |
Stop lamp not working front stop lamp switch |4.3.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |