Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Horn not working |1.7.3a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Registration plate issues | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake hose excessively deteriorated | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Footrest insecure |6.2.12 |a|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Footrest missing PILLION (6.2.12 (a)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Front Brake caliper insecure NO LOCK PIN (1.1.16 (c) (i)) | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected LOCKING DEVICE MISSING (5.2.1 (c) (ii)) | 1 |
Front Wheel fixing missing (multiple fixings) PINCH BOLT MISSING (5.2.1 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |