Most common failures | No# failures |
---|
Registration plate issues | 9 |
Headlamp aim out of alignment | 8 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 7 |
Registration plate lamp issues | 7 |
Parking brake: efficiency below requirements |3.7.B.7| | 6 |
Offside Rear fog lamp not working |1.3.2b| | 4 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 4 |
Horn not working |1.6.2a| | 3 |
Rear parking brake recording little or no effort | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
All position lamps not working |1.1.A.3b| | 2 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 2 |
Brakes imbalanced across an axle | 2 |
Rear fog lamp missing |1.3.2a| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear Rear fog lamp missing |1.3.2a| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Rear brake binding | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Outer Drag link end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b)) | 1 |
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
Nearside Front Position lamp likely to become detached |4.2.1 |c| |ii|| | 1 |
Headlamp aim projected beam image is obviously incorrect both sides |4.1.2 |c|| | 1 |
Nearside Inner Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake pipe excessively corroded | 1 |
Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Rear Rear fog lamp missing |1.3.2a| | 1 |
Steering pivot point has excessive play |2.2.B.1g| | 1 |
Offside Steering pivot point has excessive play |2.2.B.1g| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Rear fog lamp switch missing |1.3.1a| | 1 |
Offside Rear Brake pipe leaking |3.6.A.1| | 1 |
Offside Rear brake disc contaminated by oil |3.5.1h| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Offside Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Parking brake lever ratchet mechanism is excessively worn |3.1.5| | 1 |
Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Centre Rear Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Rear fog lamp likely to become detached (4.5.1 (c) (ii)) | 1 |
Rear fog lamp missing lens (4.5.1 (a) (ii)) | 1 |
Braking system leaking servo hose split (1.1.3 (d)) | 1 |
Windscreen washer not working | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Nearside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Front Lower Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Rear fog lamp insecure |1.3.2a| | 1 |
Offside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
An item not tested |Manual| | 1 |
Nearside Rear An item not tested |Manual| | 1 |
Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear Service brake lagging in operation |1.2.1 |d|| | 1 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b|| | 1 |
Mechanical brake component has restricted free movement | 1 |
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Suspension arm locating pin locking device missing Both front |2.4.G.3b| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Obligatory mirror missing |8.1.1| | 1 |
Nearside Windscreen wiper blade missing |8.2.2| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |