MOT History from tests of petrol ALFA ROMEO ALFASUDs year 1988

Review the list of common ALFA ROMEO ALFASUD failures below or to perform a specific mot history check on your ALFA ROMEO then use our popular KnowYourCar service

mot history

Pass percent:61.11%

(The average a petrol ALFA ROMEO ALFASUD year 1988 passes without issue)

Based on:36 MOT Tests

Most common failures	No# failures
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	7
Headlamp aim out of alignment	3
Offside Rear fog lamp not working \|1.3.2b\|	3
Nearside Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Headlamp not working on main beam \|1.7.5a\|	2
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Front Fuel pipe leaking \|7.2.3\|	2
Brake pipe excessively corroded	2
Exhaust emissions hydrocarbon content excessive \|7.3.B.1b\|	2
Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Nearside Inner Headlamp insecure \|1.7.3\|	1
Driver`s seat insecure \|6.2.A.1\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Emissions not tested \|7.0\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Rear fog lamp tell tale not working \|1.3.1b\|	1
Horn not working \|1.6.2a\|	1
Rear Rear fog lamp not working \|1.3.2b\|	1
Offside Front Side repeater not working \|1.4.A.2c\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Registration plate lamp issues	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Headlamp insecure \|1.7.3\|	1
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Body has a projection caused by corrosion \|6.1.C.1\|	1
Offside Rear Body has a projection caused by corrosion \|6.1.C.1\|	1
Nearside Front Seat belt retracting mechanism defective \|5.2.5b\|	1
Rear Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Front position lamp\|s\| not working \|1.1.A.3b\|	1
Position lamp switch faulty \|1.1.A.1\|	1
Headlamp switch faulty \|1.7.1\|	1
Horn not loud enough to be heard by another road user \|1.6.2b\|	1
Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Rear parking brake recording little or no effort	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Front coil spring broken \|2.4.C.1a\|	1
Offside Rear fog lamp missing \|1.3.2a\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	7
Headlamp aim out of alignment	3
Offside Rear fog lamp not working \|1.3.2b\|	3
Nearside Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Headlamp not working on main beam \|1.7.5a\|	2
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Front Fuel pipe leaking \|7.2.3\|	2
Brake pipe excessively corroded	2
Exhaust emissions hydrocarbon content excessive \|7.3.B.1b\|	2
Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Nearside Inner Headlamp insecure \|1.7.3\|	1
Driver`s seat insecure \|6.2.A.1\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Emissions not tested \|7.0\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Rear fog lamp tell tale not working \|1.3.1b\|	1
Horn not working \|1.6.2a\|	1
Rear Rear fog lamp not working \|1.3.2b\|	1
Offside Front Side repeater not working \|1.4.A.2c\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Registration plate lamp issues	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Headlamp insecure \|1.7.3\|	1
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Body has a projection caused by corrosion \|6.1.C.1\|	1
Offside Rear Body has a projection caused by corrosion \|6.1.C.1\|	1
Nearside Front Seat belt retracting mechanism defective \|5.2.5b\|	1
Rear Lower Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Front position lamp\|s\| not working \|1.1.A.3b\|	1
Position lamp switch faulty \|1.1.A.1\|	1
Headlamp switch faulty \|1.7.1\|	1
Horn not loud enough to be heard by another road user \|1.6.2b\|	1
Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Rear parking brake recording little or no effort	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Nearside Front coil spring broken \|2.4.C.1a\|	1
Offside Rear fog lamp missing \|1.3.2a\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1

MOT History from tests of petrol ALFA ROMEO ALFASUDs year 1988

Find us on Facebook