| Most common failures | No# failures |
|---|
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
| Parking brake: efficiency below requirements |3.7.B.7| | 3 |
| Nearside front parking brake recording little or no effort |3.7.B.6a| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
| Rear brake binding | 2 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Nearside Outer Headlamp insecure |1.7.3| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Offside Front brake disc contaminated by oil |3.5.1h| | 1 |
| Horn control missing |1.6.1| | 1 |
| Windscreen wiper does not clear the windscreen effectively | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Windscreen wiper not working (3.4 (a)) | 1 |
| Windscreen washer not working | 1 |
| Headlamp aim out of alignment | 1 |
| Rear Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
| Nearside Rear Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Nearside Rear Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Brake load sensing valve seized |3.6.E.3| | 1 |
| Headlamp insecure all four |1.7.3| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Offside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Offside front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake pipe excessively corroded | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Rear Statutory seat belt missing |5.1.1| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Rear Shock absorber insecure |2.7.2b| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |