Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Brake hose excessively deteriorated | 8 |
Registration plate lamp issues | 3 |
Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front Horn not working (7.7 (a) (ii)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 2 |
Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 2 |
Registration plate issues | 2 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Drive chain horseshoe locking device incorrectly fitted wrong way around (6.1.7 (j) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Lower Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Front Position lamp not working Side light not working (4.2.1 (a)) | 1 |
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Rear Wheel bearing has excessive play Excessive play in sprocket hub bearing (5.1.3 (a) (i)) | 1 |
Central Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Front All position lamps not working (4.2.1 (a)) | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Footrest insecure (6.2.12 (a)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Rear Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
Offside Rear Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
Rear Brake pedal pivot excessively tight (1.1.1 (a)) | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Direction indicator not working all (4.4.1 (a) (ii)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Brake lever insecure missing locking device on clutch pivot bolt (1.1.2 (e) (i)) | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride brake anker |6.2.1h| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride drive chain |6.2.1h| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Position lamp lens seriously defective |4.2.1 |b|| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Chain guard insecure (6.1.7 (i)) | 1 |
Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake hose damaged | 1 |
Throttle operating incorrectly Throttle cable damaged catching on steering stop. |6.2.1f| | 1 |
Rear wheel bearings have excessive free play Nearside rear sprocket bearing worn to excess. |2.4.A.2c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride sprocket loose |6.2.1h| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Stop lamp does not illuminate immediately a brake applies on front brake |1.3.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Steering operation restricted in free movement from lock to lock clutch cable tight on right lock (2.1.4 (c)) | 1 |
Lower Brake caliper insecure bush missing (1.1.16 (c) (i)) | 1 |
Stop lamp does not illuminate immediately a brake applies front lever |1.3.1a| | 1 |
Rear Roller brake test indicates a severely grabbing brake metal noise |3.3.A1b| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Rear Direction indicator incorrect colour x2 (4.4.3 (a)) | 1 |
Rear Brake component insecure sprocket carrierr (1.1.21 (c)) | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride nearside rear footpeg c clip missing. |6.2.1h| | 1 |
Front mudguard insecure front mudguard insecure. |2.3.7| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Headlamp insecure |4.1.1 |c|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride fixing bolts to drive carrier |6.2.1h| | 1 |
Central Rear Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Rear Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Brake disc contaminated (1.1.14 (b)) | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Suspension component pin or bush excessively worn cush bushes (5.3.4 (a) (i)) | 1 |