| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 25 |
| Rear reflector missing (4.8.2 (a) (ii)) | 11 |
| Registration plate issues | 10 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 10 |
| Rear Position lamp not working (4.2.1 (a)) | 9 |
| Horn not working (7.7 (a)) | 7 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 7 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 5 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 5 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 5 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 4 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 4 |
| Stop lamp remains on when the brakes are released | 4 |
| Front Position lamp not working (4.2.1 (a)) | 4 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 4 |
| Registration plate lamp issues | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 3 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 3 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Front Position lamp not working |4.2.1 |a|| | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 2 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 2 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Valve stem seriously damaged perished (5.2.3 (j)) | 2 |
| Rear Valve stem seriously damaged perished (5.2.3 (j)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Headlamp not working on main beam High beam and low beam are wrong way around on switch. (4.1.1 (a) (ii)) | 1 |
| Headlamp light intensity severely reduced main beam (4.1.4 (a)) | 1 |
| Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Brake excessively binding |1.2.1 |f|| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering chain adjustment incorrect (2.4 (a)) | 1 |
| Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Chain guard insecure |6.1.7 |i|| | 1 |
| Front Brake lagging in operation bled system. single caliper. (1.2.1 (d)) | 1 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
| Drive chain horseshoe locking device likely to become detached |6.1.7 |j| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Headlamp incorrect colour blue leds fitted and strobing (4.1.4 (a)) | 1 |
| Front Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Brake lagging in operation (1.2.1 (d)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Headlamp light intensity severely reduced low beam (4.1.4 (a)) | 1 |
| Front Stop lamp not working suspect front brake switch not working |4.3.1 |a| |ii|| | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Brake cylinder leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Fuel system component leaking |6.1.3 |b| |i|| | 1 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Offside Front Footrest missing |6.2.12 |a|| | 1 |
| Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
| Front Throttle operating incorrectly changed throttle tube (6.2.7 (a) (i)) | 1 |
| Nearside Front Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
| Front Lower Motorcycle structure modified such that structural rigidity is significantly reduced engine mount unsafe modification (6.1.1 (d) (i)) | 1 |
| Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Brake pedal insecure (1.1.2 (e) (i)) | 1 |
| Front Stop lamp not working handle bar brake switch not working (4.3.1 (a) (ii)) | 1 |
| Exhaust silencer insecure both silencers are missing securing nuts (8.1.1 (b) (i)) | 1 |
| Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect Lense twisted in headlamp shell. (4.1.2 (c)) | 1 |
| Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
| Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
| Headlamp aim not tested no dip (4.1.2 (b)) | 1 |
| Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Front Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Shock absorber has negligible damping effect rear suspension sized (5.3.2 (b)) | 1 |
| Front Motorcycle structure joining/attachment plate or fastening insecure mudguard insecure (6.1.1 (b) (i)) | 1 |
| Fuel cap ineffective seal,perished (6.1.3 (b) (i)) | 1 |
| Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Stop lamp likely to become detached (4.3.1 (c) (ii)) | 1 |
| Central Front Upper Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Central Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Central Front Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Stop lamp not working INTERMITANT (4.3.1 (a) (ii)) | 1 |
| Nearside Position lamp switch does not operate in accordance with the requirements BROKEN (4.2.2 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Front Steering operation impeded by a fairing FRONT MUDGUARD MISSING BOLTS & FLEXING (2.1.4 (e)) | 1 |
| Headlamp aim not tested SWITCH MISSING (4.1.2 (b)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Offside Front Upper Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Position lamp not working front headlamp no did beam (4.2.1 (a)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Floor brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected lower headstock bearing collapsed |2.2.2 |f| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Fuel cap ineffective non sealing fuel cap fitted (6.1.3 (b) (i)) | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
| Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Central Front All direction indicators not working Both front and rear indicators do not operate (4.4.1 (a) (ii)) | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Fuel system component leaking breather pipe missing, fuel dripping onto engine |7.2.1a| | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Headlamp aim unable to be tested No low or high beam working. (4.1.2 (b)) | 1 |
| Fuel pipe leaking Fuel pipe leaking at carburettor intake. (6.1.3 (b) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Fuel cap leaking |6.1.3 |b| |i|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |