Most common failures | No# failures |
---|
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 17 |
Headlamp aim out of alignment | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Nearside Rear Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
Horn not working |1.7.3a| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Centre Front Lower Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Outer Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |