Most common failures | No# failures |
---|
Headlamp aim out of alignment | 80 |
Rear reflector on motorcycle missing |1.4.1| | 70 |
Headlamp aim beam image kick up to the offside |1.6| | 26 |
Rear Rear reflector on motorcycle missing |1.4.1| | 19 |
Registration plate issues | 18 |
Drive chain excessively loose |6.2.1d| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear reflector missing (4.8.2 (a) (ii)) | 8 |
Horn not working |1.7.3a| | 7 |
Drive chain excessively tight |6.2.1d| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 5 |
Front Headlamp aim beam image kick up to the offside |1.6| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Brake locking device missing |3.2.A1e| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Drive chain excessively tight (6.1.7 (k) (i)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Brake disc|s| cracked |3.2.A1g| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear position lamp incorrect colour |1.1.2b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Headlamp aim beam image too far to the right |1.6.4| | 2 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Rear brake disc in such a condition that it is seriously weakened | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Brake fluid not visible (1.1.10 (d) (iii)) | 2 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 2 |
Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 2 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |