>

MOT History from tests of petrol YAMAHA YZF1000s year 1998

Review the list of common YAMAHA YZF1000 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:80.70%
(The average a petrol YAMAHA YZF1000 year 1998 passes without issue)
Based on:3,129 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment92
Rear reflector on motorcycle missing |1.4.1|78
Registration plate issues52
Front Roller brake test indicates a binding brake |3.3.A1a|32
Nearside Front shock absorber seal failed and leaking oil |2.3.3|24
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|24
Front position lamp does not illuminate immediately when switched on |1.1.3a|23
Stop lamp does not illuminate immediately a brake applies |1.3.1a|20
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|18
Headlamp aim beam image kick up to the offside |1.6|13
Rear Rear reflector on motorcycle missing |1.4.1|12
Front Floor brake test indicates a binding brake |3.3.C2c|12
Offside Front shock absorber seal failed and leaking oil |2.3.3|12
Exhaust is leaking and excessively noisey |7.1.1b|12
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|12
Drive chain excessively loose |6.2.1d|11
Drive chain excessively tight |6.2.1d|11
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|11
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|11
Front shock absorber seal failed and leaking oil |2.3.3|10
Rear wheel bearings have excessive free play |2.4.A.2c|8
Steering headbearing has excessive free play |2.2.2|8
Rear Roller brake test indicates a binding brake |3.3.A1a|8
Exhaust markings indicating not for road use or similar wording |7.1.4|7
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|7
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|7
Horn not working |1.7.3a|6
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||6
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|6
Rear suspension bearing has excessive free play |2.4.A2a|i||6
Rear Rear wheel bearings have excessive free play |2.4.A.2c|6
Rear reflector missing (4.8.2 (a) (ii))6
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))6
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|5
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|5
Rear Drive chain sprocket worn to excess |6.2.1e|5
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||5
Rear Brake pedal has inadequate reserve travel |3.1.3b|5
Offside Rear Direction indicator not working |1.5.1c|5
Rear suspension movement is excessively stiff |2.4.A.3b|5
Throttle operating incorrectly |6.2.1f|5
Rear shock absorber seal failed and leaking oil |2.4.A.1c|5
Nearside Front Direction indicator not working (4.4.1 (a) (ii))5
Rear Drive chain excessively loose |6.2.1d|4
Rear Exhaust markings indicating not for road use or similar wording |7.1.4|4
Riders seat insecure |6.2.1a|4
Front Brake excessively binding |1.2.1 |f||4
Horn not loud enough to be heard by another road user |1.7.3a|4
Rear reflector missing |4.8.2 |a| |ii||4
Nearside Front Direction indicator not working |1.5.1c|4
Drive chain worn to excess |6.2.1e|3
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Front position lamp incorrect colour |1.1.2a|3
Front Front shock absorber seal failed and leaking oil |2.3.3|3
Rear Stop lamp remains on when the brake is released |1.3.1e|3
Nearside Headlamp aim beam image kick up to the offside |1.6|3
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|3
Front Brake excessively binding (1.2.1 (f))3
Rear Shock absorber has a serious fluid leak (5.3.2 (b))3
Brake lever cannot be applied smoothly |3.1.3d|2
Brake pedal has inadequate reserve travel |3.1.3b|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
All direction indicators not working |4.4.1 |a| |ii||2
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|2
Rear mono-shock pivot seized |2.4.B.4|2
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Offside Front Direction indicators not working |1.5.1c|2
Rear Stop lamp damaged and function impaired |1.3.3a|2
Nearside Front Direction indicator incorrect colour |1.5.1b|2
Brake lever has inadequate reserve travel |3.1.3b|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a||2
Rear Floor brake test indicates a binding brake |3.3.C2c|2
Brake performance not tested |3.3|2
Front Front mudguard insecure |2.3.7|2
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Centre Rear Rear reflector on motorcycle missing |1.4.1|2
Brake hose damaged2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Front Stop lamp not working |4.3.1 |a| |ii||2
Front wheel bearings have excessive free play |2.3.5b|2
Nearside Front Direction indicators not working |1.5.1c|2
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Offside Front Direction indicator not working |1.5.1c|2
Offside Front Direction indicator insecure |1.5.3b|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Nearside Front Footrest insecure |6.2.1a|2
Stop lamp not working |4.3.1 |a| |ii||2
Rear Position lamp not working |4.2.1 |a||2
Offside Headlamp aim beam image kick up to the offside |1.6|2
Indicator tell tale not functioning |1.5.2|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Direction indicators flashing more than 120 times per minute |1.5.1c|2
Front Position lamp not working |4.2.1 |a||2
An item not tested |Manual|2
Rear Brake disc|s| cracked |3.2.A1g|2
Rear wheel bearings are excessively rough |2.4.A.2c|2
Offside Front Brake disc contaminated (1.1.14 (b))2
Throttle operating incorrectly (6.2.7 (a) (i))2
Rear Shock absorber has negligible damping effect (5.3.2 (b))2
Rear Brake excessively binding (1.2.1 (f))2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii))2
Offside Front Direction indicator not working (4.4.1 (a) (ii))2
Central Rear Rear reflector missing (4.8.2 (a) (ii))2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy