Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 259 |
Registration plate issues | 219 |
Headlamp aim out of alignment | 186 |
Drive chain excessively loose |6.2.1d| | 125 |
Rear reflector missing (4.8.2 (a) (ii)) | 120 |
Registration plate lamp issues | 103 |
Rear reflector missing |4.8.2 |a| |ii|| | 52 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 52 |
Drive chain worn to excess |6.2.1e| | 48 |
Drive chain excessively loose (6.1.7 (c) (i)) | 45 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 40 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 35 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 33 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 31 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 31 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 31 |
Drive chain excessively loose |6.1.7 |c| |i|| | 29 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 27 |
Nearside Rear Footrest missing |6.2.1a| | 27 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 26 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 26 |
Rear Rear reflector on motorcycle missing |1.4.1| | 24 |
Offside Rear Footrest missing |6.2.1a| | 24 |
Front Brake excessively binding (1.2.1 (f)) | 24 |
Rear Footrest missing (6.2.12 (a)) | 23 |
Rear Footrest missing |6.2.1a| | 22 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 21 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 20 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 20 |
Steering headbearing has excessive free play |2.2.2| | 19 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 19 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 19 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 18 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 18 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 17 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 16 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 16 |
Rear Brake excessively binding (1.2.1 (f)) | 16 |
Drive chain worn to excess (6.1.7 (c) (i)) | 16 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 15 |
Drive chain excessively tight |6.2.1d| | 15 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 13 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 13 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Stop lamp remains on when the brakes are released | 13 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 13 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 13 |
Rear Drive chain excessively loose |6.2.1d| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 12 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 12 |
Front Valve stem seriously damaged (5.2.3 (j)) | 12 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 12 |
Nearside Rear Direction indicators not working |1.5.1c| | 11 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Nearside Rear Footrest missing (6.2.12 (a)) | 11 |
Horn not working (7.7 (a) (ii)) | 11 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 11 |
Stop lamp not working (4.3.1 (a) (ii)) | 11 |
Front Brake disc|s| excessively worn |3.2.A1l| | 10 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 10 |
Front position lamp incorrect colour |1.1.2a| | 10 |
Drive chain worn to excess |6.1.7 |c| |i|| | 10 |
Offside Front Direction indicator not working |1.5.1c| | 10 |
Drive chain sprocket worn to excess |6.2.1e| | 10 |
Offside Rear Footrest missing (6.2.12 (a)) | 10 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 10 |
Throttle operating incorrectly |6.2.1f| | 9 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 9 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 9 |
Headlamp insecure |1.2.3b| | 9 |
Riders seat insecure (6.2.5 (a) (ii)) | 9 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 9 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 9 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 9 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 8 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 8 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 8 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 8 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
All direction indicators not working (4.4.1 (a) (ii)) | 8 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Nearside Front Footrest insecure |6.2.1a| | 7 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 7 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 7 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 7 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Drive chain excessively tight (6.1.7 (k) (i)) | 7 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 7 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 7 |
Rear Position lamp not working (4.2.1 (a)) | 7 |
Horn not working |1.7.3a| | 6 |
Nearside Rear Footrest missing |6.2.12 |a|| | 6 |
Offside Front Direction indicators not working |1.5.1c| | 6 |
Rear Brake excessively binding |1.2.1 |f|| | 6 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 6 |
Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 6 |
Headlamp aim not tested (4.1.2 (b)) | 6 |
Nearside Front Position lamp not working (4.2.1 (a)) | 6 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 6 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 6 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 6 |
Horn not working (7.7 (a)) | 6 |