Most common failures | No# failures |
---|
Registration plate issues | 12 |
Horn missing |1.7.1| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Horn not working |1.6.2a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Horn not working |1.7.3a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Fuel pipe leaking |7.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Upper Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Lower Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link fitted wrong |6.2.1h| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Hazard warning switch missing |1.4.B.1d| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Side repeater insecure |1.4.A.2b| | 1 |
Steering locking device missing all steering arms locking pins |2.2.C.1g| | 1 |
Nearside Footrest insecure |9.6.1| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
Offside Rear Wheel insecure |4.2.A.1c| | 1 |
Nearside Track rod end loose |2.2.B.1d| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear suspension component seized linkage bearing |2.4A2a|ii|| | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Fuel cap ineffective sealing ring missing (6.1.3 (b) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |