Most common failures | No# failures |
---|
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
An item not tested |Manual| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Lower Rear mono-shock insecure |2.4.B.4| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Horn missing |1.7.1| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Horn missing |1.7.1| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Registration plate issues | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn Suspension linkage (5.3.4 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |