Most common failures | No# failures |
---|
Headlamp aim out of alignment | 141 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 131 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 122 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 113 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 107 |
Registration plate issues | 68 |
Exhaust is leaking and excessively noisey |7.1.1b| | 52 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 45 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 43 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 37 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 36 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 34 |
Horn not working |1.7.3a| | 34 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 31 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 29 |
Stop lamp remains on when the brake is released |1.3.1e| | 28 |
Front shock absorber seal failed and leaking oil |2.3.3| | 26 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 24 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 24 |
Horn not loud enough to be heard by another road user |1.7.3a| | 23 |
Headlamp insecure |1.2.3b| | 22 |
Steering headbearing has excessive free play |2.2.2| | 21 |
Front Brake disc|s| excessively worn |3.2.A1l| | 21 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 20 |
Rear reflector on motorcycle missing |1.4.1| | 19 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 19 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 19 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 18 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 18 |
Throttle operating incorrectly |6.2.1f| | 18 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 17 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 16 |
Direction indicators not working |1.5.1c| | 15 |
Headlamp aim not tested |1.6| | 15 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 14 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 14 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 13 |
Riders seat insecure |6.2.1a| | 13 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 12 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 12 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 10 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 10 |
Rear position lamp incorrect colour |1.1.2b| | 10 |
Rear Brake locking device missing |3.2.A1e| | 10 |
Front wheel bearings have excessive free play |2.3.5b| | 10 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 9 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Direction indicator not working |1.5.1c| | 9 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Fairings insecure and likely to impede the steering |2.1.2e| | 9 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 8 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 8 |
Front wheel bearings are excessively rough |2.3.5b| | 8 |
Stop lamp affected by the operation of another lamp |1.3.2| | 8 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 8 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 7 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 7 |
Front Brake disc|s| excessively scored |3.2.A1l| | 7 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 7 |
Front Steering headbearing has excessive free play |2.2.2| | 7 |
Front position lamp incorrect colour |1.1.2a| | 7 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 7 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
Front mudguard insecure |2.3.7| | 7 |
Nearside Rear Direction indicator not working |1.5.1c| | 6 |
Indicator tell tale not functioning |1.5.2| | 6 |
Handlebar deformed |2.1.1b| | 6 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Stop lamp remains on when the brakes are released | 5 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 5 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 5 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 5 |
Offside Front Direction indicators not working |1.5.1c| | 5 |
Offside Front Direction indicator not working |1.5.1c| | 5 |
Rear Direction indicator incorrect colour |1.5.1b| | 5 |
Front Headlamp insecure |1.2.3b| | 5 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 5 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Stop lamp emits other than a steady red light |1.3.1b| | 5 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Rear suspension component loose |2.4.A.1a| | 5 |
Horn sounds harsh or grating |1.7.3c| | 5 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 5 |
Front suspension has inadequate damping effect. |2.3.6c| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Rear Direction indicator not working |1.5.1c| | 4 |
Nearside Front Direction indicators not working |1.5.1c| | 4 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 4 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 4 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 4 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 4 |
Front Direction indicator insecure |1.5.3b| | 4 |
Horn is not a constant note |1.7.3c| | 4 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 4 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 4 |
Rear position lamp insecure |1.1.1c| | 4 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 4 |
Nearside Front Direction indicator missing |1.5.1a| | 4 |
Offside Front Direction indicator missing |1.5.1a| | 4 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 4 |
Headlamp switch faulty |1.2.4| | 4 |
Horn is not continous or uniform |1.7.3c| | 3 |
Front Brake locking device missing |3.2.A1e| | 3 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 3 |
Front Brake lever attachment screws loose |3.1.2b| | 3 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Exhaust mounting missing |7.1.1c| | 3 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 3 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Front Horn not working |1.7.3a| | 3 |
Front suspension assembly component excessively bent |2.3.1| | 3 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear Brake caliper|s| insecure |3.2.A1j| | 3 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 3 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 3 |
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 3 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 3 |
Front Direction indicator incorrect colour |1.5.1b| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear Position lamp not working |4.2.1 |a|| | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Registration plate lamp issues | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |