| Most common failures | No# failures |
|---|
| Steering headbearing has excessive free play |2.2.2| | 13 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Headlamp aim out of alignment | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Front Steering headbearing has excessive free play |2.2.2| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Fairing insecure and likely to impede the steering |2.1.2e| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Offside Front Position lamp switch insecure |1.1.4b| | 2 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Registration plate issues | 1 |
| An item not tested |Manual| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Brake hose fouling |3.2.B3b| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear Brake performance not tested |3.3| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Front Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front Indicator tell tale not functioning |1.5.2| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Offside Front Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |