Most common failures | No# failures |
---|
Steering headbearing has excessive free play |2.2.2| | 9 |
Headlamp aim out of alignment | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Horn not working |1.7.3a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Centre Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Nearside Front Upper Direction indicator damaged and function impaired |1.5.3a| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Brake pipe excessively corroded | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Registration plate issues | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |