>

MOT History from tests of petrol YAMAHA YP400s year 2004

Review the list of common YAMAHA YP400 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:91.76%
(The average a petrol YAMAHA YP400 year 2004 passes without issue)
Based on:789 MOT Tests
Most common failuresNo# failures
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|5
Steering movement excessively `notchy` with the wheel raised |2.2.1b|5
Front Roller brake test indicates a binding brake |3.3.A1a|4
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|3
Registration plate lamp issues3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Headlamp aim out of alignment3
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Rear Brake disc|s| has excessive run out |3.2.A1m|2
Front Brake disc|s| excessively worn |3.2.A1l|2
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Rear Brake disc|s| is excessively distorted |3.2.A1m|2
Registration plate issues2
Front shock absorber seal failed and leaking oil |2.3.3|2
Rear brake disc in such a condition that it is seriously weakened2
Headlamp aim beam image kick up to the offside |1.6|1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Fuel cap mounting flange/sealing method defective |7.2.2c|1
Nearside Headlamp aim beam image kick up to the offside |1.6|1
Offside Headlamp aim beam image kick up to the offside |1.6|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Brake component worn and seriously reduced in strength |3.2.A1|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Roller brake test indicates a binding brake Parking brake - remains on when released. |3.3.A1a|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Horn not working |7.7 |a| |ii||1
All position lamps not working |4.2.1 |a||1
All direction indicators not working |4.4.1 |a| |ii||1
Front Brake component is fractured |3.1.5|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|1
Horn not working |1.7.3a|1
Front mudguard insecure |2.3.7|1
Rear Brake caliper|s| insecure |3.2.A1j|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j|1
Brake reaction bracket securing bolt|s| missing |3.2.A1j|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Horn not working (7.7 (a) (ii))1
Front Brake excessively binding (1.2.1 (f))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Rear Brake effort inadequate at a wheel parking brake (1.2.1 (a) (i))1
Front Stop lamp not working for front brake (4.3.1 (a) (ii))1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii))1
Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy