| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 20 |
| Registration plate lamp issues | 18 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 8 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Registration plate issues | 5 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Horn not working (7.7 (a) (ii)) | 4 |
| Rear Brake excessively binding |1.2.1 |f|| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Headlamp aim not tested (4.1.2 (b)) | 3 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
| Nearside Rear Position lamp not working (4.2.1 (a)) | 3 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Rear Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Rear brake disc in such a condition that it is seriously weakened | 2 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Offside Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Throttle operating incorrectly throttle sticking on left lock |6.2.7 |a| |i|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on l/h |1.1.3a| | 1 |
| Nearside Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies front switch? |1.3.1a| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Steering headbearing has excessive wear or free play centre position |2.2.2 |f| |i|| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake lever has restricted free movement |1.1.15 |e|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies front brake light switch not working |1.3.1a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Stop lamp not working front brake light switch (4.3.1 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Fuel cap ineffective temporary fitted (6.1.3 (b) (i)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Offside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Brake hose connection leaking At brake caliper (1.1.12 (c)) | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp front brake lever stop light on but side light goes out (4.3.3 (b)) | 1 |
| Rear Stop lamp not working no brake light from rear brake lever (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
| Nearside Rear All direction indicators incorrect colour (4.4.3 (a)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Stop lamp does not illuminate by the operation of both brake controls Brake lever control (4.3.2 (a) (iii)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 1 |