Most common failures | No# failures |
---|
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Headlamp aim out of alignment | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Horn not working |1.7.3a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake component is severely distorted |3.1.5| | 1 |
Nearside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front shock absorber seal failed and leaking oil l/h fork |2.3.3| | 1 |
Front shock absorber seal failed and leaking oil r/h fork |2.3.3| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Handlebar grip insecure to handlebar Throttle Grip Loose. |2.2.1 |d| |ii|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Rear Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Rear Rear spring incomplete |2.4.A1b|i|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Registration plate issues | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake effort inadequate at a wheel rear drum break needed adjustment (1.2.1 (a) (i)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |