>

MOT History from tests of petrol YAMAHA YP125s year 2005

Review the list of common YAMAHA YP125 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:69.13%
(The average a petrol YAMAHA YP125 year 2005 passes without issue)
Based on:515 MOT Tests
Most common failuresNo# failures
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||20
Headlamp aim out of alignment18
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|18
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||8
Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Steering movement excessively `notchy` with the wheel raised |2.2.1b|7
Exhaust is leaking and excessively noisey |7.1.1b|6
Stop lamp remains on when the brake is released |1.3.1e|5
Nearside Front shock absorber seal failed and leaking oil |2.3.3|5
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Registration plate issues4
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|4
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Steering headbearing has excessive free play |2.2.2|3
Front Roller brake test indicates a binding brake |3.3.A1a|3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Exhaust excessively deteriorated |7.1.1a|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Throttle operating incorrectly |6.2.1f|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Headlamp aim not tested |1.6|2
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Front Front shock absorber seal failed and leaking oil |2.3.3|2
Riders seat insecure |6.2.1a|2
Front Valve stem seriously damaged (5.2.3 (j))2
Rear Valve stem seriously damaged (5.2.3 (j))2
Front Headlamp aim beam image kick up to the offside |1.6|1
Front Handlebar mounting clamp loose |2.1.1a|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Brake disc|s| excessively scored |3.2.A1l|1
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Nearside Rear Stop lamp remains on when the brake is released |1.3.1e|1
Horn control defective |1.7.2a|1
Offside Exhaust has part of the system missing Mounting bolt and spacer missing |7.1.1a|1
Exhaust mounting missing Mounting bolt and spacer missing |7.1.1c|1
Offside Front Brake lever cannot be released smoothly Brake lever not releasing fully |3.1.3d|1
Offside Front Stop lamp remains on when the brake is released |1.3.1e|1
Nearside Front Front shock absorber seal failed and leaking oil Fork leaking oil, rag has been wrapped around to catch oil. |2.3.3|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Front mudguard insecure |2.3.7|1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Headlamp incorrect colour |1.2.1|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Front Headlamp deteriorated and function impaired |1.2.3a|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Stop lamp not working front control |4.3.1 |a| |ii||1
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii||1
Front Brake excessively binding |1.2.1 |f||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Offside Front Brake lever attachment screws missing |3.1.2b|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Nearside Front Direction indicator damaged and function impaired |1.5.3a|1
Fairings so located that it is likely to impede the steering |2.1.2e|1
Offside Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Headlamp dipped beam affected by the operation of the horn |1.2.2c|1
Front wheel bearings are excessively rough |2.3.5b|1
Nearside Front Direction indicators not working |1.5.1c|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test indicates a binding brake |3.3.A1a|1
Steering movement excessively rough with the wheel raised |2.2.1b|1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Front wheel bearings have excessive free play |2.3.5b|1
Front Motorcycle structure has a fracture which is likely to adversely affect braking or steering front mudguard insecure |6.1.1 |a| |ii||1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Front wheel spindle securing nut locking device missing |2.3.5a|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1
Rear Brake disc|s| has excessive run out |3.2.A1m|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Stop lamp does not illuminate immediately a brake applies not working form front brake |1.3.1a|1
Fuel pipe leaking |7.2.1a|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Headlamp aim not tested |4.1.2 |b||1
Rear Stop lamp not working switch faulty |4.3.1 |a| |ii||1
Rear Shock absorber insecurely attached |5.3.2 |a| |i||1
Wheel bearing has excessive play |5.1.3 |a| |i||1
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Rear Direction indicator not working |1.5.1c|1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear wheel has a loose wheel nut|s| |4.2.3a|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Throttle operating incorrectly Reving to high adjusted cable |6.2.1f|1
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Offside Front Direction indicator not working |1.5.1c|1
Offside Front Direction indicators not working |1.5.1c|1
Nearside Rear suspension component loose |2.4.A.1a|1
Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Front Brake caliper|s| insecure |3.2.A1j|1
Nearside Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Offside Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Rear Seat insecure |6.2.1a|1
Rear reflector missing (4.8.2 (a) (ii))1
Stop lamp not working (4.3.1 (a) (ii))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Registration plate lamp issues1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Stop lamp not working Left hand control (4.3.1 (a) (ii))1
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b))1
Offside Headlamp aim projected beam image obviously incorrect incorrect type kickup to the right (4.1.2 (c))1
Headlamp light intensity severely reduced main and dip beam (4.1.4 (a))1
Rear Stop lamp not working (4.3.1 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy