Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Registration plate lamp issues | 11 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 10 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Registration plate issues | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Offside Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Position lamp not working Affected by another lamp.|When brake/stop light applied| |4.2.1 |a|| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Motorcycle structure excessively corroded |Exccessive Frame Corrosion| |6.1.1a| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front position lamp does not illuminate immediately when switched on low beam |1.1.3a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp has more than 1/2 LEDs not functioning |4.1.1 |a| |ii|| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies switch |1.3.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Top box |6.1.1c| | 1 |
Throttle operating incorrectly sticky |6.2.1f| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Motorcycle structure excessively damaged front mudguard damaged and sharp edges protruding. |6.1.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced lower wheel cover ,bolt missing (6.1.1 (b) (ii)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Position lamp not working dipped and main beam (4.2.1 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake lever is so short that the brake cannot be readily applied control (1.1.2 (d)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working LOOSE CONNECTION. (4.3.1 (a) (ii)) | 1 |
Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Nearside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Offside Rear Exhaust has a major leak of exhaust gases large hole on side of silencer (6.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |