| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Headlamp insecure |1.2.3b| | 3 |
| Registration plate lamp issues | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Brake lever insecure |3.1.2a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Front Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Registration plate issues | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Exhaust system insecure Rear mounting bolt missing (6.1.2 (a)) | 1 |
| Front Horn not working (7.7 (a) (ii)) | 1 |
| Stop lamp not working front leaver (4.3.1 (a) (ii)) | 1 |
| Nearside Front Footrest insecure floor damaged (6.2.12 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Fuel cap ineffective Cap seal missing, stem snapped from tank. (6.1.3 (b) (i)) | 1 |
| Steering headbearing has excessive wear or free play Freeplay (2.2.2 (f) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Floor brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |