Most common failures | No# failures |
---|
Headlamp aim out of alignment | 95 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 41 |
Exhaust is leaking and excessively noisey |7.1.1b| | 35 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 33 |
Headlamp insecure |1.2.3b| | 31 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 29 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 29 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Registration plate issues | 20 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 18 |
Front wheel bearings have excessive free play |2.3.5b| | 15 |
Nearside Rear Direction indicator not working |1.5.1c| | 12 |
Rear reflector on motorcycle obscured |1.4.1| | 10 |
Front wheel bearings are excessively rough |2.3.5b| | 10 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Exhaust excessively deteriorated |7.1.1a| | 7 |
Rear Brake lever insecure |3.1.2a| | 7 |
Nearside Front Direction indicator not working |1.5.1c| | 7 |
Offside Rear Direction indicator not working |1.5.1c| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 6 |
Headlamp aim not tested |1.6| | 6 |
Front Brake disc|s| excessively worn |3.2.A1l| | 6 |
Horn not working |1.7.3a| | 5 |
Offside Front Direction indicators not working |1.5.1c| | 5 |
Offside Front Direction indicator not working |1.5.1c| | 5 |
Fairings insecure and likely to impede the steering |2.1.2e| | 5 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
Front suspension assembly component excessively misaligned |2.3.1| | 5 |
Nearside Indicator tell tale not functioning |1.5.2| | 5 |
Riders seat insecure |6.2.1a| | 5 |
Fuel system component leaking |7.2.1a| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 4 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Handlebar deformed |2.1.1b| | 4 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 4 |
Rear reflector on motorcycle obscured |1.4.2b| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
An item not tested |Manual| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Fuel hose leaking |7.2.1a| | 3 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Brake lever mounting insecure |3.1.2a| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Horn control defective |1.7.2a| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Front Motorcycle structure excessively damaged |6.1.1a| | 2 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Rear position lamp insecure |1.1.1c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front Brake lever insecure |3.1.2a| | 2 |
Rear Brake lever attachment screws loose |3.1.2b| | 2 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Exhaust has part of the system missing |7.1.1a| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Front position lamp deteriorated and function impaired |1.1.1b| | 2 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Leg shield insecure and likely to impede the steering |2.1.2e| | 2 |
Fuel pipe leaking |7.2.1a| | 2 |
Rear position lamp missing |1.1.1a| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |