Most common failures | No# failures |
---|
Headlamp aim out of alignment | 54 |
Exhaust is leaking and excessively noisey |7.1.1b| | 38 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 38 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 33 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 29 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 29 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 19 |
Rear reflector on motorcycle missing |1.4.1| | 18 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 18 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Steering headbearing has excessive free play |2.2.2| | 14 |
Registration plate issues | 11 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 9 |
Riders seat insecure |6.2.1a| | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 8 |
Rear reflector on motorcycle obscured |1.4.1| | 8 |
Headlamp insecure |1.2.3b| | 8 |
Front Steering headbearing has excessive free play |2.2.2| | 7 |
Exhaust excessively deteriorated |7.1.1a| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Horn not working |1.7.3a| | 7 |
Front Brake disc|s| excessively worn |3.2.A1l| | 7 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Throttle operating incorrectly |6.2.1f| | 5 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Nearside Rear Direction indicators not working |1.5.1c| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Headlamp aim not tested |1.6| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 3 |
Offside Direction indicator not working |1.5.1c| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Front Stop lamp missing |1.3.3a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Direction indicator not working |1.5.1c| | 2 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Rear Brake lever insecure |3.1.2a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front suspension assembly component excessively bent |2.3.1| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Registration plate lamp issues | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |