Most common failures | No# failures |
---|
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Headlamp aim out of alignment | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Registration plate issues | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Riders seat insecure |6.2.1a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Front suspension assembly component excessively bent |2.3.1| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Headlamp switch faulty |1.2.4| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Exhaust has part of the system missing |7.1.1a| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Leg shield so located that it is likely to impede the steering |2.1.2e| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Brake lever attachment screws loose |3.1.2b| | 1 |
Front Steering linkage has excessive free play |2.2.2| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Headlamp insecure faring panel loose |1.2.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies not working |1.3.1a| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure centre stand |6.1.1 |b| |i|| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure stand spring weak (6.1.1 (b) (i)) | 1 |