Most common failures | No# failures |
---|
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 25 |
Headlamp aim out of alignment | 18 |
Exhaust is leaking and excessively noisey |7.1.1b| | 13 |
Registration plate issues | 11 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 9 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front Steering headbearing has excessive free play |2.2.2| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not working |1.7.3a| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Brake lever insecure |3.1.2a| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Handlebar deformed |2.1.1b| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Rear position lamp insecure |1.1.1c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Brake component is excessively corroded |3.1.5| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Front position lamp insecure |1.1.1c| | 2 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Upper Direction indicators not working |1.5.1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Lower Motorcycle structure excessively distorted |6.1.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Front Indicator tell tale not operating correctly |1.5.2| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Horn control defective |1.7.2a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake cable badly frayed |3.2.A1b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Motorcycle structure excessively distorted |6.1.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Centre Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Brake lever insecure |3.1.2a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Rear suspension component misaligned |2.4.A.1a| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Inner Front Upper Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |