Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Registration plate issues | 2 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Centre Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Outer Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Horn not working |1.7.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure headlamp panel (6.1.1 (b) (i)) | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure handle bar/speedo panel (6.1.1 (b) (i)) | 1 |