>

MOT History from tests of petrol YAMAHA YBR125s year 2007

Review the list of common YAMAHA YBR125 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:68.41%
(The average a petrol YAMAHA YBR125 year 2007 passes without issue)
Based on:7,481 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment501
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||273
Drive chain excessively loose |6.2.1d|189
Drive chain worn to excess |6.2.1e|96
Front Roller brake test indicates a binding brake |3.3.A1a|80
Rear Drive chain sprocket worn to excess |6.2.1e|69
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||68
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|64
Nearside Front shock absorber seal failed and leaking oil |2.3.3|62
Offside Front shock absorber seal failed and leaking oil |2.3.3|62
Horn not working |1.7.3a|56
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|55
Stop lamp does not illuminate immediately a brake applies |1.3.1a|52
Headlamp not working on dipped beam (4.1.1 (a) (ii))52
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|45
Headlamp insecure |1.2.3b|42
Drive chain excessively tight |6.2.1d|42
Drive chain excessively loose (6.1.7 (c) (i))41
Wheel alignment incorrect which adversely affects the handling |2.5.1|40
Front position lamp does not illuminate immediately when switched on |1.1.3a|39
Steering headbearing has excessive free play |2.2.2|38
Registration plate issues38
Exhaust is leaking and excessively noisey |7.1.1b|35
Steering movement excessively `notchy` with the wheel raised |2.2.1b|35
Headlamp aim beam image kick up to the offside |1.6|32
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||32
Front shock absorber seal failed and leaking oil |2.3.3|29
Handlebar deformed |2.1.1b|27
Rear Roller brake test indicates a sticking brake |3.3.A1a|26
Rear wheel bearings have excessive free play |2.4.A.2c|26
Headlamp not working on main beam (4.1.1 (a) (ii))24
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|23
Rear reflector on motorcycle missing |1.4.1|23
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|22
Wheel alignment incorrect which adversely affects the steering |2.5.1|22
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|22
Stop lamp remains on when the brakes are released21
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|21
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))21
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))21
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|19
Drive chain worn to excess (6.1.7 (c) (i))19
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))19
Headlamp aim not tested |1.6|18
Rear Stop lamp remains on when the brake is released |1.3.1e|17
Horn not working (7.7 (a))17
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|16
Front Floor brake test indicates a binding brake |3.3.C2c|16
Rear Drive chain excessively loose |6.2.1d|16
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|16
Headlamp not working on dipped beam |4.1.1 |a| |ii||15
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|15
Rear suspension bush has excessive free play |2.4.A2a|i||15
Drive chain excessively loose |6.1.7 |c| |i||15
Rear Position lamp not working (4.2.1 (a))15
Rear Roller brake test indicates a binding brake |3.3.A1a|14
Exhaust excessively deteriorated |7.1.1a|14
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|14
Exhaust has a major leak of exhaust gases (6.1.2 (a))14
Front Brake excessively binding (1.2.1 (f))14
Rear Brake locking device missing |3.2.A1e|13
Front Brake lever has inadequate reserve travel |3.1.3b|13
Throttle operating incorrectly |6.2.1f|13
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|13
Front Shock absorber has a serious fluid leak (5.3.2 (b))13
Front Footrest insecure |6.2.1a|12
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||12
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))12
Horn not working (7.7 (a) (ii))12
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))12
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))12
Rear Stop lamp not working (4.3.1 (a) (ii))12
Rear suspension bearing has excessive free play |2.4.A2a|i||11
Drive chain sprocket carrier worn to excess |6.2.1e|11
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|11
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|11
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))11
Headlamp aim not tested (4.1.2 (b))11
Drive chain excessively tight (6.1.7 (k) (i))11
Rear Brake excessively binding (1.2.1 (f))11
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))11
Front Drive chain sprocket worn to excess |6.2.1e|10
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|10
Front Front shock absorber seal failed and leaking oil |2.3.3|10
Stop lamp not working |4.3.1 |a| |ii||10
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|10
Registration plate lamp issues10
Headlamp aim headlamp damaged and function impaired |1.2.3a|9
Rear Floor brake test indicates a sticking brake |3.3.C2c|9
Horn not loud enough to be heard by another road user |1.7.3a|9
Rear Drive chain worn to excess |6.2.1e|9
Front Wheel alignment incorrect which adversely affects the steering |2.5.1|9
Exhaust system insecure (6.1.2 (a))9
Headlamp insecure (4.1.1 (c))9
Front Position lamp not working (4.2.1 (a))9
Front Stop lamp not working (4.3.1 (a) (ii))9
Rear Brake reaction bracket insecure |3.2.A1j|8
Rear reflector on motorcycle obscured |1.4.1|8
Front Headlamp insecure |1.2.3b|8
Headlamp insecure |4.1.1 |c||8
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j|8
Brake pedal has inadequate reserve travel |3.1.3b|8
Wheel alignment incorrect which adversely affects the handling (2.4 (a))8
Stop lamp not working (4.3.1 (a) (ii))8

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy