Most common failures | No# failures |
---|
Headlamp aim out of alignment | 41 |
Registration plate issues | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Horn not working |1.7.3a| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear reflector on motorcycle missing (1.4.1) | 2 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Central Lower Rear mono-shock insecure attachment broken |2.4.B.4| | 1 |
All direction indicators not working all |4.4.1 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Central Front Upper Position lamp not working |4.2.1 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
An item not tested |Manual| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen no patteren |4.1.2 |a|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Seat insecure |6.2.1a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Footrest insecure split pin missing |6.2.1a| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Direction indicator obviously incorrectly positioned solo motorcycles ??? 240mm at the front and 180mm at the rear |4.4.3 |a|| | 1 |
Front Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator obscured tail light obscures the indicator |1.5.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Offside Exhaust mounting missing |7.1.1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Vehicle identification number has more than one different number displayed |6.3.5b| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Both mirrors |6.1.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake lining|s| contaminated |1.1.13 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Stop lamp emits other than a steady red light (1.3.1b) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Fuel system component leaking Wet residue collecting at the bottom of both float bowls (6.1.3 (b) (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Offside Front Lower Motorcycle structure joining/attachment plate or fastening insecure Front Offside Axle pinch bolt missing. (6.1.1 (b) (i)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |