Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Registration plate issues | 9 |
Horn not working |1.7.3a| | 3 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Stop lamp|s| all not working from foot brake |4.3.1 |a| |iii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Horn not working |1.6.2a| | 1 |
Registration plate lamp issues | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Rear brake disc contaminated by oil |3.5.1h| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Service brake excessively binding |1.2.1 |f|| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Brake pipe likely to become detached or damaged |1.1.11 |d| |ii|| | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Brake pipe likely to become detached or damaged |1.1.11 |d| |ii|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake hose damaged | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |