Most common failures | No# failures |
---|
Headlamp aim out of alignment | 12 |
Registration plate issues | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Centre Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Upper Riders seat insecure |6.2.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
An item not tested |Manual| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Headlamp missing |1.2.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Rear brake binding | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Lower Steering lock stop ineffective |2.1.3| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Brake lever attachment screws missing |3.1.2b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Headlamp switch faulty |1.2.4| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Parking brake lever ratchet mechanism is broken |3.1.5| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Rear fog lamp switch missing |1.3.1a| | 1 |
Front wheel spindle securing nut locking device missing |9.2.8b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust system insecure mounting point broken |6.1.2 |a|| | 1 |
Wheel bearing rough when rotated Front bearings |5.1.3 |b| |i|| | 1 |
Suspension component has excessive wear or free play Movement in rear suspension |5.3.3 |d|| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear wheel spindle R clip was missing |6.2.1h| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake torque arm securing bolt split pin was missing |6.2.1h| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Footrest insecure |6.2.1a| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |