Most common failures | No# failures |
---|
Headlamp aim out of alignment | 66 |
Rear reflector on motorcycle missing |1.4.1| | 19 |
Registration plate issues | 19 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 17 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Horn not working |1.7.3a| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
Headlamp aim beam image kick up to the offside |1.6| | 12 |
Rear reflector missing (4.8.2 (a) (ii)) | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Throttle operating incorrectly |6.2.1f| | 7 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 4 |
Horn not working (7.7 (a)) | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
An item not tested |Manual| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Riders seat insecure |6.2.1a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |