Most common failures | No# failures |
---|
Headlamp aim out of alignment | 113 |
Rear reflector on motorcycle missing |1.4.1| | 77 |
Registration plate issues | 40 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 30 |
Exhaust is leaking and excessively noisey |7.1.1b| | 25 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 24 |
Horn not working |1.7.3a| | 21 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 19 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 18 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Steering headbearing has excessive free play |2.2.2| | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 14 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 13 |
Rear reflector missing (4.8.2 (a) (ii)) | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Rear Brake locking device missing |3.2.A1e| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Exhaust excessively deteriorated |7.1.1a| | 8 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Throttle operating incorrectly |6.2.1f| | 8 |
Nearside Rear Direction indicator not working |1.5.1c| | 8 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 7 |
Headlamp insecure |1.2.3b| | 6 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Riders seat insecure |6.2.1a| | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
Nearside Rear Direction indicator insecure |1.5.3b| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Rear Wheel spoke excessively loose |4.2.1b| | 4 |
Front Wheel spoke excessively loose |4.2.1b| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 4 |
Brake locking device missing |3.2.A1e| | 4 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 4 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
Front Direction indicator not working |1.5.1c| | 3 |
Front Horn not working |1.7.3a| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
Front Brake disc contaminated (1.1.14 (b)) | 3 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Rear Direction indicator not working |1.5.1c| | 2 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Front Stop lamp missing |1.3.3a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Brake lever cannot be released smoothly |3.1.3d| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Service brake: efficiency below requirements |3.7.C.1a| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 2 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |