| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Registration plate issues | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear wheel bearings have excessive free play (2.4.A.2c) | 2 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Fuel pipe union leaking |7.2.1a| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Fuel pipe leaking |7.2.1a| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Brake lever pivots excessively worn |3.1.3a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
| Rear Footrest missing |6.2.12 |a|| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Upper Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Registration plate lamp issues | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Wheel excessively corroded rear wheel rim (5.2.2 (c) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Floor brake test indicates a binding brake (3.3.C2c) | 1 |
| Nearside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Central Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Front Position lamp missing (4.2.1 (a)) | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |