Most common failures | No# failures |
---|
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Headlamp aim out of alignment | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Registration plate issues | 8 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Centre Front Fuel cap sealing washer missing |7.2.2c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Direction indicator missing All |1.5.1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Brake hose fouling Fouling rear brake linkage |3.2.B3b| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Braking system does not have an approriate system/s fitted according to its age caliper missing |3.1.1| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Brake lever mounting cracked |3.1.2c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Horn not working |1.7.3a| | 1 |
Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Wheel fixing missing |single fixing| |5.2.1 |a| |ii|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Centre Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Outer Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake component is fractured |3.1.5| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Steering linkage locking device missing spindle (2.1.3 (d)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |