MOT History from tests of petrol YAMAHA XTZ660s year 1995

Review the list of common YAMAHA XTZ660 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history

Pass percent:80.65%

(The average a petrol YAMAHA XTZ660 year 1995 passes without issue)

Based on:124 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	6
Horn not working \|1.7.3a\|	4
Front Roller brake test indicates a binding brake \|3.3.A1a\|	3
Handlebar mounting clamp loose \|2.1.1a\|	2
Registration plate issues	2
Rear Hydraulic brake control feels spongy \|3.1.4a\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Headlamp aim beam image kick up to the offside \|1.6\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Brake pedal attachment screws loose \|3.1.2b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Brake pedal has insufficient reserve travel \|1.1.2 \|a\|\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Lower Rear mono-shock pivot excessively worn \|2.4.B.4\|	1
Drive chain worn to excess \|6.2.1e\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Front Wheel spoke excessively loose \|4.2.1b\|	1
Rear mono-shock pivot excessively worn \|2.4.B.4\|	1
Nearside Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Offside Rear Footrest insecure \|6.2.1a\|	1
Rear Drive chain excessively loose \|6.2.1d\|	1
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	1
Front Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Offside Rear Brake component is excessively corroded \|3.1.5\|	1
Drive chain sprocket carrier worn to excess \|6.2.1e\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.6\|	1
Offside Headlamp aim beam image kick up to the offside \|1.6\|	1
Wheel more than one fixing missing \|5.2.1 \|a\| \|ii\|\|	1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))	1
Rear Rear reflector missing (4.8.2 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	6
Horn not working \|1.7.3a\|	4
Front Roller brake test indicates a binding brake \|3.3.A1a\|	3
Handlebar mounting clamp loose \|2.1.1a\|	2
Registration plate issues	2
Rear Hydraulic brake control feels spongy \|3.1.4a\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Headlamp aim beam image kick up to the offside \|1.6\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Brake pedal attachment screws loose \|3.1.2b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Brake pedal has insufficient reserve travel \|1.1.2 \|a\|\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Lower Rear mono-shock pivot excessively worn \|2.4.B.4\|	1
Drive chain worn to excess \|6.2.1e\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Front Wheel spoke excessively loose \|4.2.1b\|	1
Rear mono-shock pivot excessively worn \|2.4.B.4\|	1
Nearside Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Offside Rear Footrest insecure \|6.2.1a\|	1
Rear Drive chain excessively loose \|6.2.1d\|	1
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	1
Front Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Offside Rear Brake component is excessively corroded \|3.1.5\|	1
Drive chain sprocket carrier worn to excess \|6.2.1e\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.6\|	1
Offside Headlamp aim beam image kick up to the offside \|1.6\|	1
Wheel more than one fixing missing \|5.2.1 \|a\| \|ii\|\|	1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))	1
Rear Rear reflector missing (4.8.2 (a) (ii))	1

MOT History from tests of petrol YAMAHA XTZ660s year 1995

Find us on Facebook